orangepi@orangepi5:~$ inxi -Fc0
System:
  Host: orangepi5 Kernel: 5.10.110-rockchip-rk3588 aarch64 bits: 64
    Desktop: Xfce 4.16.0 Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)
Machine:
  Type: ARM System: Orange Pi 5 details: N/A
CPU:
  Info: 3x 4-core model: N/A variant-1: cortex-a76 variant-2: cortex-a55
    bits: 64 type: MCP AMP cache: L2: 3x 512 KiB (1.5 MiB)
  Speed (MHz): avg: 408 min/max: 408/1800:2400 cores: 1: 408 2: 408 3: 408
    4: 408 5: 408 6: 408 7: 408 8: 408
Graphics:
  Device-1: display-subsystem driver: rockchip_drm v: N/A
  Device-2: mali-bifrost driver: mali v: N/A
  Device-3: rk3588-dw-hdmi driver: dwhdmi_rockchip v: N/A
  Display: server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
    gpu: rockchip_drm,mali,dwhdmi_rockchip resolution: 1920x1080~60Hz
  OpenGL: renderer: llvmpipe (LLVM 13.0.1 128 bits) v: 4.5 Mesa 22.0.5
Audio:
  Device-1: hdmi driver: rk_hdmi_sound
  Device-2: rk3588-dw-hdmi driver: dwhdmi_rockchip
  Device-3: hdmi driver: rk_hdmi_sound
  Sound Server-1: ALSA v: k5.10.110-rockchip-rk3588 running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
Network:
  Device-1: rk3588-gmac driver: rk_gmac_dwmac
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 66:bd:6f:11:95:d7
Drives:
  Local Storage: total: 29.9 GiB used: 11.49 GiB (38.4%)
  ID-1: /dev/mmcblk1 model: 5cMJR size: 29.9 GiB
Partition:
  ID-1: / size: 29.14 GiB used: 11.4 GiB (39.1%) fs: ext4 dev: /dev/mmcblk1p2
  ID-2: /boot size: 255.7 MiB used: 94.2 MiB (36.8%) fs: vfat
    dev: /dev/mmcblk1p1
  ID-3: /var/log size: 187.3 MiB used: 2.4 MiB (1.3%) fs: ext4
    dev: /dev/zram1
Swap:
  ID-1: swap-1 type: zram size: 3.75 GiB used: 0 KiB (0.0%) dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 40.7 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 246 Uptime: 7m Memory: 7.51 GiB used: 796.8 MiB (10.4%)
  Shell: Bash inxi: 3.3.13
orangepi@orangepi5:~$

orangepi@orangepi5:~$ glxinfo -B
name of display: :0
libGL error: failed to create dri screen
libGL error: failed to load driver: rockchip
libGL error: failed to create dri screen
libGL error: failed to load driver: rockchip
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Mesa/X.org (0xffffffff)
    Device: llvmpipe (LLVM 13.0.1, 128 bits) (0xffffffff)
    Version: 22.0.5
    Accelerated: no
    Video memory: 7689MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.5
    Max compat profile version: 4.5
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 13.0.1, 128 bits)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 22.0.5
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.5 (Compatibility Profile) Mesa 22.0.5
OpenGL shading language version string: 4.50
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.0.5
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

orangepi@orangepi5:~$

orangepi@orangepi5:~$ eglinfo
EGL client extensions string:
    EGL_EXT_client_extensions EGL_EXT_platform_base
    EGL_KHR_client_get_all_proc_addresses EGL_KHR_platform_x11
    EGL_EXT_platform_x11 EGL_KHR_platform_gbm

GBM platform:
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
eglinfo: eglInitialize failed

X11 platform:
EGL API version: 1.4
EGL vendor string: ARM
EGL version string: 1.4 Valhall-"g6p0-01eac0"
EGL client APIs: OpenGL_ES
EGL extensions string:
    EGL_NV_context_priority_realtime EGL_KHR_image_pixmap
    EGL_KHR_partial_update EGL_EXT_image_dma_buf_import
    EGL_KHR_config_attribs EGL_KHR_image EGL_KHR_image_base
    EGL_KHR_fence_sync EGL_KHR_wait_sync EGL_KHR_gl_colorspace
    EGL_KHR_get_all_proc_addresses EGL_IMG_context_priority
    EGL_KHR_no_config_context EGL_EXT_image_dma_buf_import
    EGL_EXT_image_dma_buf_import_modifiers EGL_EXT_yuv_surface
    EGL_EXT_pixel_format_float EGL_ARM_pixmap_multisample_discard
    EGL_KHR_gl_texture_2D_image EGL_KHR_gl_renderbuffer_image
    EGL_KHR_create_context EGL_KHR_surfaceless_context
    EGL_KHR_gl_texture_cubemap_image EGL_EXT_image_gl_colorspace
    EGL_EXT_create_context_robustness
Configurations:
     bf lv colorbuffer dp st  ms    vis   cav bi  renderable  supported
  id sz  l  r  g  b  a th cl ns b    id   eat nd gl es es2 vg surfaces
---------------------------------------------------------------------
0x01 32  0  8  8  8  8  0  0  0 0 0x67TC      a     y  y     win,pb,pix
0x02 32  0  8  8  8  8 24  0  0 0 0x67TC      a     y  y     win,pb,pix
0x03 32  0  8  8  8  8 24  8  0 0 0x67TC      a     y  y     win,pb,pix
0x04 32  0  8  8  8  8 24  8  4 1 0x67TC      a     y  y     win,pb,pix
0x05 16  0  5  6  5  0  0  0  0 0 0x00--      y     y  y     pb,pix
0x06 16  0  5  6  5  0 24  0  0 0 0x00--      y     y  y     pb,pix
0x07 16  0  5  6  5  0 24  8  0 0 0x00--      y     y  y     pb,pix
0x08 16  0  5  6  5  0 24  8  4 1 0x00--      y     y  y     pb,pix
0x09 24  0  8  8  8  0  0  0  0 0 0x21TC      y     y  y     win,pb,pix
0x0a 24  0  8  8  8  0 24  8  0 0 0x21TC      y     y  y     win,pb,pix
0x0b 24  0  8  8  8  0  0  0  4 1 0x21TC      y     y  y     win,pb,pix
0x0c 24  0  8  8  8  0 24  8  4 1 0x21TC      y     y  y     win,pb,pix
0x0d 16  0  5  5  5  1 24  8  0 0 0x00--      a     y  y     pb,pix
0x0e 16  0  5  5  5  1 24  8  4 1 0x00--      a     y  y     pb,pix
0x0f 16  0  4  4  4  4 24  8  0 0 0x00--      a     y  y     pb,pix
0x10 16  0  4  4  4  4 24  8  4 1 0x00--      a     y  y     pb,pix
0x11 32  0  8  8  8  8 24  8  8 1 0x67TC      a     y  y     win,pb,pix
0x12 16  0  5  6  5  0 24  8  8 1 0x00--      y     y  y     pb,pix
0x13 24  0  8  8  8  0 24  8  8 1 0x21TC      y     y  y     win,pb,pix
0x14 32  0  8  8  8  8 24  8 16 1 0x67TC      a     y  y     win,pb,pix
0x15 16  0  5  6  5  0 24  8 16 1 0x00--      y     y  y     pb,pix
0x16 24  0  8  8  8  0 24  8 16 1 0x21TC      y     y  y     win,pb,pix
0x17 24  0  8  8  8  0  0  0  0 0 0x21TC            y  y     win,pb,pix
0x18 64  0 16 16 16 16 24  8  0 0 0x00--            y  y     pb
0x19 32  0 10 10 10  2 24  8  0 0 0x00--      a     y  y     pb,pix
0x1a 24  0  8  8  8  0  0  0  0 0 0x21TC      y     y  y     win,pb,pix

orangepi@orangepi5:~$

orangepi@orangepi5:~$ glmark2-es2-wayland
Error: main: Could not initialize canvas
orangepi@orangepi5:~$

orangepi@orangepi5:~$ glmark2-es2
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
=======================================================
    glmark2 2021.02
=======================================================
    OpenGL Information
    GL_VENDOR:     ARM
    GL_RENDERER:   Mali-LODX
    GL_VERSION:    OpenGL ES 3.2 v1.g6p0-01eac0.efb75e2978d783a80fe78be1bfb0efc1
=======================================================
[build] use-vbo=false: FPS: 688 FrameTime: 1.453 ms
[build] use-vbo=true: FPS: 855 FrameTime: 1.170 ms
[texture] texture-filter=nearest: FPS: 899 FrameTime: 1.112 ms
[texture] texture-filter=linear: FPS: 859 FrameTime: 1.164 ms
[texture] texture-filter=mipmap: FPS: 848 FrameTime: 1.179 ms
[shading] shading=gouraud: FPS: 904 FrameTime: 1.106 ms
[shading] shading=blinn-phong-inf: FPS: 886 FrameTime: 1.129 ms
[shading] shading=phong: FPS: 814 FrameTime: 1.229 ms
[shading] shading=cel: FPS: 789 FrameTime: 1.267 ms
[bump] bump-render=high-poly: FPS: 552 FrameTime: 1.812 ms
[bump] bump-render=normals: FPS: 952 FrameTime: 1.050 ms
[bump] bump-render=height: FPS: 900 FrameTime: 1.111 ms
[effect2d] kernel=0,1,0;1,-4,1;0,1,0;: FPS: 973 FrameTime: 1.028 ms
[effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: FPS: 746 FrameTime: 1.340 ms
[pulsar] light=false:quads=5:texture=false: FPS: 973 FrameTime: 1.028 ms
[desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: FPS: 482 FrameTime: 2.075 ms
[desktop] effect=shadow:windows=4: FPS: 785 FrameTime: 1.274 ms
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 222 FrameTime: 4.505 ms
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=subdata: FPS: 194 FrameTime: 5.155 ms
[buffer] columns=200:interleave=true:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 354 FrameTime: 2.825 ms
[ideas] speed=duration: FPS: 491 FrameTime: 2.037 ms
[jellyfish] <default>: FPS: 696 FrameTime: 1.437 ms
[terrain] <default>: FPS: 186 FrameTime: 5.376 ms
[shadow] <default>: FPS: 732 FrameTime: 1.366 ms
[refract] <default>: FPS: 301 FrameTime: 3.322 ms
[conditionals] fragment-steps=0:vertex-steps=0: FPS: 874 FrameTime: 1.144 ms
[conditionals] fragment-steps=5:vertex-steps=0: FPS: 837 FrameTime: 1.195 ms
[conditionals] fragment-steps=0:vertex-steps=5: FPS: 802 FrameTime: 1.247 ms
[function] fragment-complexity=low:fragment-steps=5: FPS: 868 FrameTime: 1.152 ms
[function] fragment-complexity=medium:fragment-steps=5: FPS: 788 FrameTime: 1.269 ms
[loop] fragment-loop=false:fragment-steps=5:vertex-steps=5: FPS: 877 FrameTime: 1.140 ms
[loop] fragment-steps=5:fragment-uniform=false:vertex-steps=5: FPS: 833 FrameTime: 1.200 ms
[loop] fragment-steps=5:fragment-uniform=true:vertex-steps=5: FPS: 820 FrameTime: 1.220 ms
=======================================================
                                  glmark2 Score: 720
=======================================================
orangepi@orangepi5:~$

orangepi@orangepi5:~$ glmark2
libGL error: failed to create dri screen
libGL error: failed to load driver: rockchip
libGL error: failed to create dri screen
libGL error: failed to load driver: rockchip
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
=======================================================
    glmark2 2021.02
=======================================================
    OpenGL Information
    GL_VENDOR:     Mesa/X.org
    GL_RENDERER:   llvmpipe (LLVM 13.0.1, 128 bits)
    GL_VERSION:    4.5 (Compatibility Profile) Mesa 22.0.5
=======================================================
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[build] use-vbo=false: FPS: 111 FrameTime: 9.009 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[build] use-vbo=true: FPS: 112 FrameTime: 8.929 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[texture] texture-filter=nearest: FPS: 325 FrameTime: 3.077 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[texture] texture-filter=linear: FPS: 246 FrameTime: 4.065 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[texture] texture-filter=mipmap: FPS: 191 FrameTime: 5.236 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[shading] shading=gouraud: FPS: 85 FrameTime: 11.765 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[shading] shading=blinn-phong-inf: FPS: 75 FrameTime: 13.333 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[shading] shading=phong: FPS: 62 FrameTime: 16.129 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[shading] shading=cel: FPS: 69 FrameTime: 14.493 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[bump] bump-render=high-poly: FPS: 40 FrameTime: 25.000 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[bump] bump-render=normals: FPS: 278 FrameTime: 3.597 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[bump] bump-render=height: FPS: 291 FrameTime: 3.436 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[effect2d] kernel=0,1,0;1,-4,1;0,1,0;: FPS: 114 FrameTime: 8.772 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: FPS: 99 FrameTime: 10.101 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[pulsar] light=false:quads=5:texture=false: FPS: 213 FrameTime: 4.695 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: FPS: 25 FrameTime: 40.000 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[desktop] effect=shadow:windows=4: FPS: 65 FrameTime: 15.385 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 65 FrameTime: 15.385 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=subdata: FPS: 67 FrameTime: 14.925 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[buffer] columns=200:interleave=true:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 66 FrameTime: 15.152 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[ideas] speed=duration: FPS: 80 FrameTime: 12.500 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[jellyfish] <default>: FPS: 57 FrameTime: 17.544 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[terrain] <default>: FPS: 3 FrameTime: 333.333 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[shadow] <default>: FPS: 54 FrameTime: 18.519 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[refract] <default>: FPS: 9 FrameTime: 111.111 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[conditionals] fragment-steps=0:vertex-steps=0: FPS: 139 FrameTime: 7.194 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[conditionals] fragment-steps=5:vertex-steps=0: FPS: 137 FrameTime: 7.299 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[conditionals] fragment-steps=0:vertex-steps=5: FPS: 140 FrameTime: 7.143 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[function] fragment-complexity=low:fragment-steps=5: FPS: 98 FrameTime: 10.204 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[function] fragment-complexity=medium:fragment-steps=5: FPS: 101 FrameTime: 9.901 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[loop] fragment-loop=false:fragment-steps=5:vertex-steps=5: FPS: 129 FrameTime: 7.752 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[loop] fragment-steps=5:fragment-uniform=false:vertex-steps=5: FPS: 135 FrameTime: 7.407 ms
** GLX does not support GLX_EXT_swap_control or GLX_MESA_swap_control!
** Failed to set swap interval. Results may be bounded above by refresh rate.
[loop] fragment-steps=5:fragment-uniform=true:vertex-steps=5: FPS: 128 FrameTime: 7.812 ms
=======================================================
                                  glmark2 Score: 115
=======================================================
orangepi@orangepi5:~$

orangepi@orangepi5:~$ dmesg|grep -i mali
[    7.672628] mali fb000000.gpu: Kernel DDK version g13p0-01eac0
[    7.672650] mali fb000000.gpu: Looking up mali-supply from device tree
[    7.673153] mali fb000000.gpu: Looking up mem-supply from device tree
[    7.676448] mali fb000000.gpu: Looking up mali-supply from device tree
[    7.676724] mali fb000000.gpu: Looking up mem-supply from device tree
[    7.676911] mali fb000000.gpu: Looking up mali-supply from device tree
[    7.677340] mali fb000000.gpu: leakage=12
[    7.677395] mali fb000000.gpu: Looking up mali-supply from device tree
[    7.677419] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    7.679307] mali fb000000.gpu: pvtm=869
[    7.679356] mali fb000000.gpu: pvtm-volt-sel=3
[    7.680674] mali fb000000.gpu: avs=0
[    7.682511] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    7.689235] mali fb000000.gpu: GPU hardware issue table may need updating:
[    7.689246] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    7.689340] mali fb000000.gpu: No priority control manager is configured
[    7.689348] mali fb000000.gpu: No memory group manager is configured
[    7.689378] mali fb000000.gpu: Protected memory allocator not available
[    7.689818] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[    7.690655] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[    7.690666] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[    7.690992] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[    7.691272] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[    7.691552] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[    7.695409] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[    7.695604] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    7.696563] mali fb000000.gpu: Probed as mali0
[    7.782056] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '10:16:11', on 'Dec  7 2022'.
[    7.782364] Mali:
[    7.782367] Mali device driver loaded
[   16.423617] mali fb000000.gpu: Loading Mali firmware 0x1010000
[   16.425057] mali fb000000.gpu: Mali firmware git_sha: e6cfd856a9b143e1ab6657328e8b5ffc44a623f9
orangepi@orangepi5:~$

orangepi@orangepi5:~$ apt search libmali
Sorting... Done
Full Text Search... Done
libmali-valhall-g610-g6p0-x11-gbm/now 1.9-1 arm64 [installed,local]
  Mali GPU User-Space Binary Drivers

orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa
Repository: 'deb https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu/ jammy main'
Description:
https://gitlab.com/panfork/mesa
You need to download mali firmware from https://github.com/JeffyCN/rockchip_mirrors/raw/libmali/firmware/g610/mali_csffw.bin and copy it to /lib/firmware/
More info: https://launchpad.net/~liujianfeng1994/+archive/ubuntu/panfork-mesa
Adding repository.
Press [ENTER] to continue or Ctrl-c to cancel.
Adding deb entry to /etc/apt/sources.list.d/liujianfeng1994-ubuntu-panfork-mesa-jammy.list
Adding disabled deb-src entry to /etc/apt/sources.list.d/liujianfeng1994-ubuntu-panfork-mesa-jammy.list
Adding key to /etc/apt/trusted.gpg.d/liujianfeng1994-ubuntu-panfork-mesa.gpg with fingerprint 0B2F0747E3BD546820A639B68065BE1FC67AABDE
Hit:1 http://repo.huaweicloud.com/ubuntu-ports jammy InRelease
Hit:2 http://repo.huaweicloud.com/ubuntu-ports jammy-security InRelease
Hit:3 https://repo.huaweicloud.com/docker-ce/linux/ubuntu jammy InRelease
Hit:4 http://repo.huaweicloud.com/ubuntu-ports jammy-updates InRelease
Get:5 https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu jammy InRelease [18.1 kB]
Hit:6 http://repo.huaweicloud.com/ubuntu-ports jammy-backports InRelease
Get:7 https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu jammy/main armhf Packages [4,136 B]
Get:8 https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu jammy/main arm64 Packages [4,152 B]
Fetched 26.4 kB in 4s (6,080 B/s)
Reading package lists... Done
W: https://repo.huaweicloud.com/docker-ce/linux/ubuntu/dists/jammy/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
orangepi@orangepi5:~$

orangepi@orangepi5:~$ ls -l /lib/firmware/*mali*
-rw-r--r-- 1 root root 266240 Jul 29  2020 /lib/firmware/mali_csffw.bin
orangepi@orangepi5:~$
orangepi@orangepi5:~$ sudo curl --output /lib/firmware/mali_csffw.bin https://raw.githubusercontent.com/JeffyCN/rockchip_mirrors/libmali/firmware/g610/mali_csffw.bin
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  268k  100  268k    0     0  1319k      0 --:--:-- --:--:-- --:--:-- 1326k
orangepi@orangepi5:~$ ls -l /lib/firmware/*mali*
-rw-r--r-- 1 root root 274432 Dec 27 21:08 /lib/firmware/mali_csffw.bin
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo apt update
Hit:1 http://repo.huaweicloud.com/ubuntu-ports jammy InRelease
Hit:2 http://repo.huaweicloud.com/ubuntu-ports jammy-security InRelease
Hit:3 http://repo.huaweicloud.com/ubuntu-ports jammy-updates InRelease
Hit:4 http://repo.huaweicloud.com/ubuntu-ports jammy-backports InRelease
Hit:5 https://repo.huaweicloud.com/docker-ce/linux/ubuntu jammy InRelease
Hit:6 https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu jammy InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
33 packages can be upgraded. Run 'apt list --upgradable' to see them.
W: https://repo.huaweicloud.com/docker-ce/linux/ubuntu/dists/jammy/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
orangepi@orangepi5:~$

orangepi@orangepi5:~$ apt list --upgradable
Listing... Done
ffmpeg/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
gstreamer1.0-tools/jammy-updates 1.20.3-0ubuntu1 arm64 [upgradable from: 1.20.3-0ubuntu1]
libavcodec-dev/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavcodec58/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavdevice-dev/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavdevice58/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavfilter-dev/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavfilter7/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavformat-dev/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavformat58/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavutil-dev/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libavutil56/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libdvbv5-0/jammy 1.22.1-2build1 arm64 [upgradable from: 1.22.1-2build1]
libegl-mesa0/jammy 23.0~panfork~csf~git221210.120202c6757~j arm64 [upgradable from: 22.0.5-0ubuntu0.1]
libgbm-dev/jammy 23.0~panfork~csf~git221210.120202c6757~j arm64 [upgradable from: 22.0.5-0ubuntu0.1]
libgbm1/jammy 23.0~panfork~csf~git221210.120202c6757~j arm64 [upgradable from: 22.0.5-0ubuntu0.1]
libgl1-mesa-dri/jammy 23.0~panfork~csf~git221210.120202c6757~j arm64 [upgradable from: 22.0.5-0ubuntu0.1]
libglapi-mesa/jammy 23.0~panfork~csf~git221210.120202c6757~j arm64 [upgradable from: 22.0.5-0ubuntu0.1]
libglx-mesa0/jammy 23.0~panfork~csf~git221210.120202c6757~j arm64 [upgradable from: 22.0.5-0ubuntu0.1]
libgstreamer1.0-0/jammy-updates 1.20.3-0ubuntu1 arm64 [upgradable from: 1.20.3-0ubuntu1]
libmpv1/jammy 0.34.1-1ubuntu3 arm64 [upgradable from: 0.34.1-1ubuntu3]
libpostproc55/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libswresample-dev/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libswresample3/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
libswscale5/jammy-security,jammy-updates 7:4.4.2-0ubuntu0.22.04.1 arm64 [upgradable from: 7:4.4.2-0ubuntu0.22.04.1]
mesa-common-dev/jammy 23.0~panfork~csf~git221210.120202c6757~j arm64 [upgradable from: 22.0.5-0ubuntu0.1]
mpv/jammy 0.34.1-1ubuntu3 arm64 [upgradable from: 0.34.1-1ubuntu3]
v4l-utils/jammy 1.22.1-2build1 arm64 [upgradable from: 1.22.1-2build1]
wiringpi/jammy 2.50-0ubuntu2 arm64 [upgradable from: 2.46]
xserver-common/jammy-security,jammy-security,jammy-updates,jammy-updates 2:21.1.3-2ubuntu2.5 all [upgradable from: 2:21.1.3-2ubuntu2]
xserver-xorg-core/jammy-security,jammy-updates 2:21.1.3-2ubuntu2.5 arm64 [upgradable from: 2:21.1.3-2ubuntu2]
xserver-xorg-dev/jammy-security,jammy-updates 2:21.1.3-2ubuntu2.5 arm64 [upgradable from: 2:21.1.3-2ubuntu2]
xserver-xorg-legacy/jammy-security,jammy-updates 2:21.1.3-2ubuntu2.5 arm64 [upgradable from: 2:21.1.3-2ubuntu2]
orangepi@orangepi5:~$

orangepi@orangepi5:~$ glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Panfrost (0xffffffff)
    Device: Mali-G610 (Panfrost) (0xffffffff)
    Version: 23.0.0
    Accelerated: yes
    Video memory: 7689MB
    Unified memory: yes
    Preferred profile: compat (0x2)
    Max core profile version: 0.0
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.1
OpenGL vendor string: Panfrost
OpenGL renderer string: Mali-G610 (Panfrost)
OpenGL version string: 3.0 Mesa 23.0.0-devel
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.1 Mesa 23.0.0-devel
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10

orangepi@orangepi5:~$

orangepi@orangepi5:~$ inxi -Fc0
System:
  Host: orangepi5 Kernel: 5.10.110-rockchip-rk3588 aarch64 bits: 64
    Desktop: Xfce 4.16.0 Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)
Machine:
  Type: ARM System: Orange Pi 5 details: N/A
CPU:
  Info: 3x 4-core model: N/A variant-1: cortex-a55 variant-2: cortex-a76
    bits: 64 type: MCP AMP cache: L2: 3x 512 KiB (1.5 MiB)
  Speed (MHz): avg: 408 min/max: 408/1800:2400 cores: 1: 408 2: 408 3: 408
    4: 408 5: 408 6: 408 7: 408 8: 408
Graphics:
  Device-1: display-subsystem driver: rockchip_drm v: N/A
  Device-2: mali-bifrost driver: mali v: N/A
  Device-3: rk3588-dw-hdmi driver: dwhdmi_rockchip v: N/A
  Display: server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
    gpu: rockchip_drm,mali,dwhdmi_rockchip resolution: 1920x1080~60Hz
  OpenGL: renderer: Mali-G610 (Panfrost) v: 3.0 Mesa 23.0.0-devel
Audio:
  Device-1: hdmi driver: rk_hdmi_sound
  Device-2: rk3588-dw-hdmi driver: dwhdmi_rockchip
  Device-3: hdmi driver: rk_hdmi_sound
  Sound Server-1: ALSA v: k5.10.110-rockchip-rk3588 running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
Network:
  Device-1: rk3588-gmac driver: rk_gmac_dwmac
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 7e:2c:10:9c:32:61
Drives:
  Local Storage: total: 29.9 GiB used: 5 GiB (16.7%)
  ID-1: /dev/mmcblk1 model: 5cMJR size: 29.9 GiB
Partition:
  ID-1: / size: 29.14 GiB used: 4.9 GiB (16.8%) fs: ext4 dev: /dev/mmcblk1p2
  ID-2: /boot size: 255.7 MiB used: 94.2 MiB (36.8%) fs: vfat
    dev: /dev/mmcblk1p1
  ID-3: /var/log size: 187.3 MiB used: 4.5 MiB (2.4%) fs: ext4
    dev: /dev/zram1
Swap:
  ID-1: swap-1 type: zram size: 3.75 GiB used: 0 KiB (0.0%) dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 45.3 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 263 Uptime: 1m Memory: 7.51 GiB used: 706.6 MiB (9.2%)
  Shell: Bash inxi: 3.3.13
orangepi@orangepi5:~$

orangepi@orangepi5:~$ eglinfo
EGL client extensions string:
    EGL_EXT_client_extensions EGL_EXT_platform_base
    EGL_KHR_client_get_all_proc_addresses EGL_KHR_platform_x11
    EGL_EXT_platform_x11 EGL_KHR_platform_gbm

GBM platform:
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
eglinfo: eglInitialize failed

X11 platform:
EGL API version: 1.4
EGL vendor string: ARM
EGL version string: 1.4 Valhall-"g6p0-01eac0"
EGL client APIs: OpenGL_ES
EGL extensions string:
    EGL_NV_context_priority_realtime EGL_KHR_image_pixmap
    EGL_KHR_partial_update EGL_EXT_image_dma_buf_import
    EGL_KHR_config_attribs EGL_KHR_image EGL_KHR_image_base
    EGL_KHR_fence_sync EGL_KHR_wait_sync EGL_KHR_gl_colorspace
    EGL_KHR_get_all_proc_addresses EGL_IMG_context_priority
    EGL_KHR_no_config_context EGL_EXT_image_dma_buf_import
    EGL_EXT_image_dma_buf_import_modifiers EGL_EXT_yuv_surface
    EGL_EXT_pixel_format_float EGL_ARM_pixmap_multisample_discard
    EGL_KHR_gl_texture_2D_image EGL_KHR_gl_renderbuffer_image
    EGL_KHR_create_context EGL_KHR_surfaceless_context
    EGL_KHR_gl_texture_cubemap_image EGL_EXT_image_gl_colorspace
    EGL_EXT_create_context_robustness
Configurations:
     bf lv colorbuffer dp st  ms    vis   cav bi  renderable  supported
  id sz  l  r  g  b  a th cl ns b    id   eat nd gl es es2 vg surfaces
---------------------------------------------------------------------
0x01 32  0  8  8  8  8  0  0  0 0 0x67TC      a     y  y     win,pb,pix
0x02 32  0  8  8  8  8 24  0  0 0 0x67TC      a     y  y     win,pb,pix
0x03 32  0  8  8  8  8 24  8  0 0 0x67TC      a     y  y     win,pb,pix
0x04 32  0  8  8  8  8 24  8  4 1 0x67TC      a     y  y     win,pb,pix
0x05 16  0  5  6  5  0  0  0  0 0 0x00--      y     y  y     pb,pix
0x06 16  0  5  6  5  0 24  0  0 0 0x00--      y     y  y     pb,pix
0x07 16  0  5  6  5  0 24  8  0 0 0x00--      y     y  y     pb,pix
0x08 16  0  5  6  5  0 24  8  4 1 0x00--      y     y  y     pb,pix
0x09 24  0  8  8  8  0  0  0  0 0 0x21TC      y     y  y     win,pb,pix
0x0a 24  0  8  8  8  0 24  8  0 0 0x21TC      y     y  y     win,pb,pix
0x0b 24  0  8  8  8  0  0  0  4 1 0x21TC      y     y  y     win,pb,pix
0x0c 24  0  8  8  8  0 24  8  4 1 0x21TC      y     y  y     win,pb,pix
0x0d 16  0  5  5  5  1 24  8  0 0 0x00--      a     y  y     pb,pix
0x0e 16  0  5  5  5  1 24  8  4 1 0x00--      a     y  y     pb,pix
0x0f 16  0  4  4  4  4 24  8  0 0 0x00--      a     y  y     pb,pix
0x10 16  0  4  4  4  4 24  8  4 1 0x00--      a     y  y     pb,pix
0x11 32  0  8  8  8  8 24  8  8 1 0x67TC      a     y  y     win,pb,pix
0x12 16  0  5  6  5  0 24  8  8 1 0x00--      y     y  y     pb,pix
0x13 24  0  8  8  8  0 24  8  8 1 0x21TC      y     y  y     win,pb,pix
0x14 32  0  8  8  8  8 24  8 16 1 0x67TC      a     y  y     win,pb,pix
0x15 16  0  5  6  5  0 24  8 16 1 0x00--      y     y  y     pb,pix
0x16 24  0  8  8  8  0 24  8 16 1 0x21TC      y     y  y     win,pb,pix
0x17 24  0  8  8  8  0  0  0  0 0 0x21TC            y  y     win,pb,pix
0x18 64  0 16 16 16 16 24  8  0 0 0x00--            y  y     pb
0x19 32  0 10 10 10  2 24  8  0 0 0x00--      a     y  y     pb,pix
0x1a 24  0  8  8  8  0  0  0  0 0 0x21TC      y     y  y     win,pb,pix

orangepi@orangepi5:~$

orangepi@orangepi5:~$ glmark2-es2
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
=======================================================
    glmark2 2021.02
=======================================================
    OpenGL Information
    GL_VENDOR:     ARM
    GL_RENDERER:   Mali-LODX
    GL_VERSION:    OpenGL ES 3.2 v1.g6p0-01eac0.efb75e2978d783a80fe78be1bfb0efc1
=======================================================
[build] use-vbo=false: FPS: 718 FrameTime: 1.393 ms
[build] use-vbo=true: FPS: 850 FrameTime: 1.176 ms
[texture] texture-filter=nearest: FPS: 977 FrameTime: 1.024 ms
[texture] texture-filter=linear: FPS: 820 FrameTime: 1.220 ms
[texture] texture-filter=mipmap: FPS: 833 FrameTime: 1.200 ms
[shading] shading=gouraud: FPS: 804 FrameTime: 1.244 ms
[shading] shading=blinn-phong-inf: FPS: 789 FrameTime: 1.267 ms
[shading] shading=phong: FPS: 799 FrameTime: 1.252 ms
[shading] shading=cel: FPS: 798 FrameTime: 1.253 ms
[bump] bump-render=high-poly: FPS: 607 FrameTime: 1.647 ms
[bump] bump-render=normals: FPS: 897 FrameTime: 1.115 ms
[bump] bump-render=height: FPS: 898 FrameTime: 1.114 ms
[effect2d] kernel=0,1,0;1,-4,1;0,1,0;: FPS: 945 FrameTime: 1.058 ms
[effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: FPS: 716 FrameTime: 1.397 ms
[pulsar] light=false:quads=5:texture=false: FPS: 958 FrameTime: 1.044 ms
[desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: FPS: 479 FrameTime: 2.088 ms
[desktop] effect=shadow:windows=4: FPS: 702 FrameTime: 1.425 ms
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 195 FrameTime: 5.128 ms
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=subdata: FPS: 193 FrameTime: 5.181 ms
[buffer] columns=200:interleave=true:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 348 FrameTime: 2.874 ms
[ideas] speed=duration: FPS: 475 FrameTime: 2.105 ms
[jellyfish] <default>: FPS: 723 FrameTime: 1.383 ms
[terrain] <default>: FPS: 184 FrameTime: 5.435 ms
[shadow] <default>: FPS: 716 FrameTime: 1.397 ms
[refract] <default>: FPS: 292 FrameTime: 3.425 ms
[conditionals] fragment-steps=0:vertex-steps=0: FPS: 880 FrameTime: 1.136 ms
[conditionals] fragment-steps=5:vertex-steps=0: FPS: 810 FrameTime: 1.235 ms
[conditionals] fragment-steps=0:vertex-steps=5: FPS: 804 FrameTime: 1.244 ms
[function] fragment-complexity=low:fragment-steps=5: FPS: 862 FrameTime: 1.160 ms
[function] fragment-complexity=medium:fragment-steps=5: FPS: 832 FrameTime: 1.202 ms
[loop] fragment-loop=false:fragment-steps=5:vertex-steps=5: FPS: 800 FrameTime: 1.250 ms
[loop] fragment-steps=5:fragment-uniform=false:vertex-steps=5: FPS: 749 FrameTime: 1.335 ms
[loop] fragment-steps=5:fragment-uniform=true:vertex-steps=5: FPS: 817 FrameTime: 1.224 ms
=======================================================
                                  glmark2 Score: 705
=======================================================
orangepi@orangepi5:~$

orangepi@orangepi5:~$ glmark2
=======================================================
    glmark2 2021.02
=======================================================
    OpenGL Information
    GL_VENDOR:     Panfrost
    GL_RENDERER:   Mali-G610 (Panfrost)
    GL_VERSION:    3.0 Mesa 23.0.0-devel
=======================================================
[build] use-vbo=false:Queue group error: status 0x24c00488 sideband 0x140947fbf
syncobj 0x5598b328f0 wait timeout
CSI 0 CS_EXTRACT (9664) != 9856, CS_ACTIVE (0)
fences:
 slot 3: seqnum 51
 slot 2: seqnum 51
syncobj 0x5598b328f0 wait timeout
CSI 1 CS_EXTRACT (12864) != 13120, CS_ACTIVE (0)
fences:
 slot 3: seqnum 51
 slot 2: seqnum 51
MESA: error: Context reset
bound csi 0 again
bound csi 1 again
Queue group error: status 0x24c00488 sideband 0x124b794ff
syncobj 0x5598b328f0 wait timeout
CSI 0 CS_EXTRACT (13120) != 13312, CS_ACTIVE (0)
fences:
 slot 3: seqnum 69
 slot 2: seqnum 69
syncobj 0x5598b328f0 wait timeout
CSI 1 CS_EXTRACT (17472) != 17728, CS_ACTIVE (0)
fences:
 slot 3: seqnum 69
 slot 2: seqnum 69
MESA: error: Context reset
bound csi 0 again
bound csi 1 again
 FPS: 156 FrameTime: 6.410 ms
[build] use-vbo=true: FPS: 492 FrameTime: 2.033 ms
[texture] texture-filter=nearest: FPS: 451 FrameTime: 2.217 ms
[texture] texture-filter=linear: FPS: 458 FrameTime: 2.183 ms
[texture] texture-filter=mipmap: FPS: 463 FrameTime: 2.160 ms
[shading] shading=gouraud: FPS: 444 FrameTime: 2.252 ms
[shading] shading=blinn-phong-inf: FPS: 237 FrameTime: 4.219 ms
[shading] shading=phong: FPS: 431 FrameTime: 2.320 ms
[shading] shading=cel: FPS: 454 FrameTime: 2.203 ms
[bump] bump-render=high-poly: FPS: 572 FrameTime: 1.748 ms
[bump] bump-render=normals: FPS: 658 FrameTime: 1.520 ms
[bump] bump-render=height: FPS: 652 FrameTime: 1.534 ms
[effect2d] kernel=0,1,0;1,-4,1;0,1,0;: FPS: 659 FrameTime: 1.517 ms
[effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: FPS: 538 FrameTime: 1.859 ms
[pulsar] light=false:quads=5:texture=false: FPS: 569 FrameTime: 1.757 ms
[desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: FPS: 196 FrameTime: 5.102 ms
[desktop] effect=shadow:windows=4: FPS: 471 FrameTime: 2.123 ms
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 303 FrameTime: 3.300 ms
[buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=subdata: FPS: 291 FrameTime: 3.436 ms
[buffer] columns=200:interleave=true:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 313 FrameTime: 3.195 ms
[ideas] speed=duration: FPS: 243 FrameTime: 4.115 ms
[jellyfish] <default>: FPS: 476 FrameTime: 2.101 ms
[terrain] <default>: FPS: 57 FrameTime: 17.544 ms
[shadow] <default>: FPS: 347 FrameTime: 2.882 ms
[refract] <default>: FPS: 275 FrameTime: 3.636 ms
[conditionals] fragment-steps=0:vertex-steps=0: FPS: 599 FrameTime: 1.669 ms
[conditionals] fragment-steps=5:vertex-steps=0: FPS: 391 FrameTime: 2.558 ms
[conditionals] fragment-steps=0:vertex-steps=5: FPS: 382 FrameTime: 2.618 ms
[function] fragment-complexity=low:fragment-steps=5: FPS: 390 FrameTime: 2.564 ms
[function] fragment-complexity=medium:fragment-steps=5: FPS: 376 FrameTime: 2.660 ms
[loop] fragment-loop=false:fragment-steps=5:vertex-steps=5: FPS: 384 FrameTime: 2.604 ms
[loop] fragment-steps=5:fragment-uniform=false:vertex-steps=5: FPS: 361 FrameTime: 2.770 ms
[loop] fragment-steps=5:fragment-uniform=true:vertex-steps=5: FPS: 293 FrameTime: 3.413 ms
=======================================================
                                  glmark2 Score: 405
=======================================================
orangepi@orangepi5:~$

U-Boot SPL 2021.10`(Oct 31 2022`- 12:11:37 +0800)
DDR version: dc2e84f0.
Trying to boot from SPI

OpenSBI v1.0
 ``・           ・$x慄韶鞐X萎X・・蝠・蝠・・H   厰                      ・$<慙韶隶 戉・}}髫碯           鯏5R矜聰}燾濵・蝠       B炫     ・}モ驍5R矜矜浯z浯:浯碌 ・      ?浯矜5R矜}}驍磊モ炫     ・磊}}}モ磊モ驍}5R碯・・        r炫             ・・統驍}髱}}}}盾}}}}恕}}}}餤R`淫
酌 鞐_粟?典Rj・Platform Name   `鞐靹挨筧MX坑ive VisionFive V2
Platform Features     玻雕`medeleg
・衣clint-mswiCount    鞐漂jだ?宿喫A%"?
Platform Timer Device     > aclint-mtimer @ 400ppppHz
Platform Console Device   : uart8250
Platform HSM Device   鞐芽njjづ+
                                嵋
                                  U・
                                     TWガYH 虻 ---
Platform Shutdown Device  : ---
Firmware Base   ``鞐鞐X挨dL^0ppppp
Firmware Size   鞐鞐隶360 KB
Runtime SBI Version    ``H.3

Domain0 Name  ``鞐_霎鞣|'X・
                            W?+V
                                萌
                                  覃(*UH``>'・C・main0 HARTs   玻鞐X鞣x・b
                                                                          RbRbRb・jつ蟀+V
         蜂嶽㌦
               $$Hx     鞐雕`px00000000p2000000-0x00000000p200ffff (I)
Domain0 Region01   鞐鞐x00000鍵<0000ppp-0x000000004007ffff ()
Domain0 Region02   鞐鞐#dn00000pppp00-0xffffffffffffffff (R,W,X)
Domain0 Next Address    雕 px0000000p40200000
x000000<220pp00g1  `鞐鞐
Lomain0 Next Mode  ``鞐O萎S-mode
Domain0 SysReset    ``鞐 .Y・｜!・
                                  ・*UHR・```隶霎l憊0
Boot HART 弟main   `鞐霍`尞ot
Boot HART Priv Version     v1.11
Boot HART Base ISA ``武瑁:`rv64imafdcbx
Boot HART ISA Gxtensions  : none
Boot HART PMp Count  ``雕`8
Boot HART pMP`・・W-W/$'HMN瘴ot HART PMP Allress Bits: 34
Boot HART MHpM Count   雕 2
°
  ・*U飯R・ρ$,愽韶鞐汰疏Bjい裨
                               ・*UHSQ・ρ$,犯0萎x0000000000b109


U-Boot 2021.10 (Oct 31 022`- 12:11:37 +0800), Build: jenkins-VF2_515_Branch_SDK_Release-10

CPU:  事64imacu
Model: StarFive VisionFive V2
DRAM: `4 GiB
MMC:   sdio0@16010000: 0, sdio1@16020000:`0
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, 逸tal 16 MiB
*** Warning - bad CRC,`using default environment

StarFive EEPROM format v2

--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110A1-2249-D004E00p-00000617
data version: 0x2
PCB 劫vision: 0xa1
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:18:2f
Ethernet MAC1 address: 6c:cf:39:00:18:30
--------EEPROM INFO--------

In:   `serial@10000000
ﾅｺ  熈ﾗ・ﾘ 怯ｰｰｰｰｰｰｰut:  `・・X 怯0000ppp
ﾍ・褌ｺ ﾓ鴕・ﾖ鴣鴆鏆鴕・ﾖｲ
ﾎ襁ｺ   襁隹ｺ 襁韃襁ﾀｱｶｰｳｰｰｰｰｬ 襁雎ｺ 襁韃襁ﾀｱｶｰｴｰｰｰｰ
鴟肛  鴟鴆ⅴ ｣ｰｬ ﾏﾋ
澵羈 鴣 脉褓・蒟肄
跣・蒟肄 ｱ
糀・瀅蒟 跪碯・蒟肄 ｱ
ﾃ碚ｧ・・粮・・蒟肄
ﾆ硅・・ ・砌 ｧｯ糀・ｯⅷｮ
ﾈ鴟 碚・・・ ・ 磆糀・ｺ  ｰ
ﾃ碚ｧ・・粮・・蒟肄
ﾉ瀇・鰀 褓・褓・踉・ 澵羈 ｮｮｮ
｣｣ ﾗ碪鵫鰀ｺ ﾉⅱ 蓊 褸肄裝・ｱｰｴｸｵｷｶ 糴・ｭ 聶・
｣｣ ﾉ鮻・ 鴃・蓊 栁 ｽ ｱｰｴｸｵｷｸ ｽ ｰｰｰｲ
｣｣ ﾅ・ｺ ｢糀・ｲ｢ ⅰ・蒟跌鮱・
鴟肛  鴟鴆ⅴ ｣ｰｬ ﾏﾋ
澵羈 鴣 脉褓・蒟肄
ﾓ聶・鴃・澵・ｱｺｲｮｮｮ
ﾆ・鮏 ｯ糀・ｯ褸鴃ｯ褸鴃ｮ胥鮻
ﾒ襁褻鴃・跌・ｺ ｯ糀・ｯ褸鴃ｯ褸鴃ｮ胥鮻
ｸｶｳ 糴・砌 鴃 ｵ 炫 ｨｱｶｸ ﾋ鯆ｯ
ﾕｭﾂ・・淲ⅶ
ｱｺ      ﾄ裘鱆・ﾇﾎﾕｯﾌ鴃 糀・ｯ・ｵｮｱｵｮｰｭ碪跌
ｲｺ      ﾄ裘鱆・ﾇﾎﾕｯﾌ鴃 糀・ｯ・ｵｮｱｵｮｰｭ碪跌 ｨ 襁ｩ
ﾅⅵ褪 肛・肄ｺ

 not found
U-Boot menu
1:      Debian GNU/Linux bookworm/sid 5.15.0-starfive
2:      Debian GNU/Linux bookworm/sid 5.15.0-starfive (rescue target)
Enter choice: 1
1:      Debian GNU/Linux bookworm/sid 5.15.0-starfive
Retrieving file: /boot/initrd.img-5.15.0-starfive
9684944 bytes read in 409 ms (22.6 MiB/s)
Retrieving file: /boot/vmlinuz-5.15.0-starfive
8015160 bytes read in 341 ms (22.4 MiB/s)
append: root=/dev/mmcblk1p3 root=/dev/mmcblk1p3 rw console=tty0 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0
Retrieving file: /boot/dtbs/starfive/starfive_visionfive2.dtb
Failed to load '/boot/dtbs/starfive/starfive_visionfive2.dtb'
kernel_comp_addr_r or kernel_comp_size is not provided!
2:      Debian GNU/Linux bookworm/sid 5.15.0-starfive (rescue target)
Retrieving file: /boot/initrd.img-5.15.0-starfive
9684944 bytes read in 410 ms (22.5 MiB/s)
Retrieving file: /boot/vmlinuz-5.15.0-starfive
8015160 bytes read in 342 ms (22.4 MiB/s)
append: root=/dev/mmcblk1p3 root=/dev/mmcblk1p3 rw console=tty0 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0 single
Retrieving file: /boot/dtbs/starfive/starfive_visionfive2.dtb
Failed to load '/boot/dtbs/starfive/starfive_visionfive2.dtb'
kernel_comp_addr_r or kernel_comp_size is not provided!
SCRIPT FAILED:`continuing...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select! : -110
** Unable to read file ubootefi.var **
Failed to load EFI variables
Scanning mmc 1:3...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
ethernet@16030000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
phy_startup() failed: -110FAILED: -110ethernet@1604000p Waiting for PHY auto negotiation to complete.... done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.135 (9 ms)
Using ethernet@16040000 峨vice
TFTP from server 192.168.1.1; our IP address is 192.168.1.135
Filename 'boot.scr.uimg'.
Load address: 0x88100000
Loading: *
TFTP server died; starting again
BOOTP broadcast 1
DHCP client bound to address 192.168.1.135 (5 ms)
Using ethernet@16040000`"evice
TFTP`from server 192.168.1.1; our IP X屋ess is 192.168.1.135
Filename 'boot.scr.uimg'.
Load address: 0x44000000
\oading: *
TFTP server died; starting again
StarFive #

root@starfive:~# dmesg
[    0.000000] Linux version 5.15.0-starfive (sw_buildbot@mdcsw02) (riscv64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP Fri Nov 11 06:58:52 EST 2022
[    0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[    0.000000] Machine model: StarFive VisionFive V2
[    0.000000] earlycon: uart0 at MMIO32 0x0000000010000000 (options '115200')
[    0.000000] printk: bootconsole [uart0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000c010ffff]
[    0.000000]   node   0: [mem 0x00000000c0110000-0x00000000c01fffff]
[    0.000000]   node   0: [mem 0x00000000c0200000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000013fffffff]
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10000
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI v0.2 HSM extension detected
[    0.000000] CPU with hartid=0 is not available
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv: ISA extensions acdfim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] percpu: Embedded 17 pages/cpu s31528 r8192 d29912 u69632
[    0.000000] pcpu-alloc: s31528 r8192 d29912 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1033735
[    0.000000] Kernel command line: root=/dev/mmcblk1p3 rw console=tty0 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0
[    0.000000] Unknown command line parameters: stmmaceth=chain_mode:1 selinux=0
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3451376K/4192256K available (9735K kernel code, 4976K rwdata, 4096K rodata, 2191K init, 399K bss, 216592K reserved, 524288K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu:     RCU debug extended QS entry/exit.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts.
[    0.000000] random: get_random_bytes called from start_kernel+0x4d0/0x6e2 with crng_init=0
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [4]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns
[    0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns
[    0.008951] clocksource: timer@13050000.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.020261] clocksource: timer@13050000.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.031576] clocksource: timer@13050000.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.042886] clocksource: timer@13050000.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.054338] Console: colour dummy device 80x25
[    0.060268] printk: console [tty0] enabled
[    0.064812] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000)
[    0.076021] pid_max: default: 32768 minimum: 301
[    0.081254] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.089480] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.099361] ASID allocator disabled
[    0.103295] rcu: Hierarchical SRCU implementation.
[    0.108721] EFI services will not be available.
[    0.114054] smp: Bringing up secondary CPUs ...
[    0.120457] smp: Brought up 1 node, 4 CPUs
[    0.126075] devtmpfs: initialized
[    0.135754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.146600] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.166989] pinctrl core: initialized pinctrl subsystem
[    0.173535] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.180666] cpuidle: using governor menu
[    0.201831] platform 29400000.dc8200: Fixing up cyclic dependency with soc:rgb-output
[    0.210774] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200
[    0.219803] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output
[    0.228563] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200
[    0.246590] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.253988] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.264114] vgaarb: loaded
[    0.267293] SCSI subsystem initialized
[    0.271540] libata version 3.00 loaded.
[    0.271686] usbcore: registered new interface driver usbfs
[    0.277769] usbcore: registered new interface driver hub
[    0.283635] usbcore: registered new device driver usb
[    0.289270] mc: Linux media interface: v0.10
[    0.293981] videodev: Linux video capture interface: v2.00
[    0.300191] Advanced Linux Sound Architecture Driver Initialized.
[    0.307205] Bluetooth: Core ver 2.22
[    0.311174] NET: Registered PF_BLUETOOTH protocol family
[    0.317014] Bluetooth: HCI device and connection manager initialized
[    0.324011] Bluetooth: HCI socket layer initialized
[    0.329379] Bluetooth: L2CAP socket layer initialized
[    0.334950] Bluetooth: SCO socket layer initialized
[    0.340680] clocksource: Switched to clocksource riscv_clocksource
[    0.353211] NET: Registered PF_INET protocol family
[    0.359048] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.370394] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear)
[    0.379897] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.388975] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.398232] TCP: Hash tables configured (established 32768 bind 32768)
[    0.405693] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.413368] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.421739] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.428445] RPC: Registered named UNIX socket transport module.
[    0.434983] RPC: Registered udp transport module.
[    0.440153] RPC: Registered tcp transport module.
[    0.445335] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.452999] PCI: CLS 0 bytes, default 64
[    0.457838] Initialise system trusted keyrings
[    0.462904] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    0.463103] Unpacking initramfs...
[    0.474979] NFS: Registering the id_resolver key type
[    0.480567] Key type id_resolver registered
[    0.485205] Key type id_legacy registered
[    0.489715] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.497124] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.505333] ntfs: driver 2.1.32 [Flags: R/W].
[    0.510544] fuse: init (API version 7.34)
[    0.546191] NET: Registered PF_ALG protocol family
[    0.551521] Key type asymmetric registered
[    0.556040] Asymmetric key parser 'x509' registered
[    0.561512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.569665] io scheduler mq-deadline registered
[    0.574683] io scheduler kyber registered
[    0.580841] start plist test
[    0.584361] end plist test
[    0.663781] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully.
[    0.675015] L2CACHE: DataError @ 0x00000000.08040110
[    0.680559] L2CACHE: DataFail @ 0x00000000.08040140
[    0.686063] L2CACHE: No. of Banks in the cache: 8
[    0.691275] L2CACHE: No. of ways per bank: 16
[    0.696083] L2CACHE: Sets per bank: 256
[    0.700317] L2CACHE: Bytes per cache block: 64
[    0.705263] L2CACHE: Index of the largest way enabled: 15
[    0.711557] jh7110-pmu 17030000.power-controller: registered 8 power domains
[    0.778505] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.798718] @@#########################@@
[    0.841091] @@ dev ptr:ffffffe0bfee0000/1500/1
[    0.846243] PVR_K:  1: Read BVNC 36.50.54.182 from HW device registers
[    0.853536] PVR_K:  1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system
[    0.863719] [drm] Initialized pvr 1.17.6210866 20170530 for 18000000.gpu on minor 0
[    0.882617] loop: module loaded
[    0.888040] libphy: Fixed MDIO Bus: probed
[    0.894178] CAN device driver interface
[    0.899029] starfive-eth-plat 16030000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    0.910539] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    0.918854] starfive-eth-plat 16030000.ethernet:     DWMAC4/5
[    0.924950] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported
[    0.933612] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported
[    0.942293] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported
[    0.949784] starfive-eth-plat 16030000.ethernet: TSO supported
[    0.956250] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    0.965505] starfive-eth-plat 16030000.ethernet: Enabled Flow TC (entries=1)
[    0.973305] starfive-eth-plat 16030000.ethernet: TSO feature enabled
[    0.980318] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width
[    1.124750] Freeing initrd memory: 9456K
[    1.384601] libphy: stmmac: probed
[    1.388379] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    1.399339] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    1.411585] starfive-eth-plat 16040000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    1.423012] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    1.431295] starfive-eth-plat 16040000.ethernet:     DWMAC4/5
[    1.437346] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported
[    1.445989] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported
[    1.454632] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported
[    1.462120] starfive-eth-plat 16040000.ethernet: TSO supported
[    1.468551] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.477783] starfive-eth-plat 16040000.ethernet: Enabled Flow TC (entries=1)
[    1.485565] starfive-eth-plat 16040000.ethernet: TSO feature enabled
[    1.492576] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width
[    1.751521] libphy: stmmac: probed
[    1.755297] YT8512B Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[    1.765604] YT8512B Ethernet stmmac-1:03: attached PHY driver (mii_bus:phy_addr=stmmac-1:03, irq=POLL)
[    1.777445] Intel(R) Wireless WiFi driver for Linux
[    1.784774] cdns3-starfive 10210000.usbdrd: usb mode 2 2.0 probe success
[    1.792913] usbcore: registered new interface driver uas
[    1.798823] usbcore: registered new interface driver usb-storage
[    1.821012] starfive-rtc 17040000.rtc: registered as rtc0
[    1.826978] starfive-rtc 17040000.rtc: setting system clock to 2001-01-01T00:00:00 UTC (978307200)
[    1.837020] i2c_dev: i2c /dev entries driver
[    1.842173] usbcore: registered new interface driver uvcvideo
[    1.849628] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500)
[    1.859373] Bluetooth: HCI UART driver ver 2.3
[    1.864298] Bluetooth: HCI UART protocol H4 registered
[    1.870170] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to get regulator for cpu!
[    1.879313] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to init starfive cpu dvfs info
[    1.889570] cpuidle-riscv-sbi: idle driver registered for all CPUs
[    1.896727] sdhci: Secure Digital Host Controller Interface driver
[    1.903568] sdhci: Copyright(c) Pierre Ossman
[    1.908398] Synopsys Designware Multimedia Card Interface Driver
[    1.915320] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.922343] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel
[    1.931491] jh7110-sec 16000000.crypto: Cannot initial dma chan
[    1.938323] usbcore: registered new interface driver usbhid
[    1.944501] usbhid: USB HID core driver
[    1.948990] usbcore: registered new interface driver snd-usb-audio
[    1.958869] NET: Registered PF_PACKET protocol family
[    1.964489] can: controller area network core
[    1.969410] NET: Registered PF_CAN protocol family
[    1.974720] can: raw protocol
[    1.977994] can: broadcast manager protocol
[    1.982641] can: netlink gateway - max_hops=1
[    1.987755] Bluetooth: RFCOMM TTY layer initialized
[    1.993184] Bluetooth: RFCOMM socket layer initialized
[    1.998872] Bluetooth: RFCOMM ver 1.11
[    2.003035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.008890] Bluetooth: BNEP filters: protocol multicast
[    2.014674] Bluetooth: BNEP socket layer initialized
[    2.020319] 9pnet: Installing 9P2000 support
[    2.025103] Key type dns_resolver registered
[    2.030602] Loading compiled-in X.509 certificates
[    2.072105] starfive_jh7110-pinctrl 13040000.gpio: SiFive GPIO chip registered 64 GPIOs
[    2.081740] starfive_jh7110-pinctrl 17020000.gpio: SiFive GPIO chip registered 4 GPIOs
[    2.090717] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels
[    2.098603] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels
[    2.107989] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present!
[    2.117159] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 22
[    2.127395] pcie_plda 2b000000.pcie: host bridge /soc/pcie@2B000000 ranges:
[    2.135184] pcie_plda 2b000000.pcie:      MEM 0x0030000000..0x0037ffffff -> 0x0030000000
[    2.144142] pcie_plda 2b000000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    2.153125] ATR entry: 0x0940000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    2.161696] ATR entry: 0x0030000000 -> 0x0030000000 [0x0008000000] (param: 0x000000)
[    2.170244] ATR entry: 0x0900000000 -> 0x0900000000 [0x0040000000] (param: 0x000000)
[    2.520712] pcie_plda 2b000000.pcie: Port link up.
[    2.526140] pcie_plda 2b000000.pcie: PCI host bridge to bus 0000:00
[    2.533078] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.539131] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    2.546733] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
[    2.555028] pci 0000:00:00.0: [1556:1111] type 01 class 0x078000
[    2.561674] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref]
[    2.569702] pci 0000:00:00.0: supports D1 D2
[    2.574420] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.585107] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.594081] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    2.600737] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    2.608302] pci 0000:01:00.0: PME# supported from D0 D3cold
[    2.617633] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.624971] pci 0000:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref]
[    2.633439] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref]
[    2.642301] pci 0000:00:00.0: BAR 8: assigned [mem 0x30000000-0x300fffff]
[    2.649786] pci 0000:01:00.0: BAR 0: assigned [mem 0x30000000-0x30000fff 64bit]
[    2.657883] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.663367] pci 0000:00:00.0:   bridge window [mem 0x30000000-0x300fffff]
[    2.670970] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    2.677211] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    2.683495] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x9d4 took 12241 usecs
[    2.691888] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    2.697671] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    2.706274] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[    2.716459] pcie_plda 2b000000.pcie: msi#0 address_hi 0x0 address_lo 0x190
[    2.724442] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    2.730218] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    2.738398] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    2.746064] hub 1-0:1.0: USB hub found
[    2.750240] hub 1-0:1.0: 1 port detected
[    2.755621] hub 2-0:1.0: USB hub found
[    2.759798] hub 2-0:1.0: 4 ports detected
[    2.766996] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges:
[    2.774742] pcie_plda 2c000000.pcie:      MEM 0x0038000000..0x003fffffff -> 0x0038000000
[    2.783700] pcie_plda 2c000000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    2.792685] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    2.801252] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000)
[    2.809802] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000)
[    2.970743] usb usb2-port2: over-current condition
[    3.070737] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.130747] usb usb2-port4: over-current condition
[    3.253597] hub 1-1:1.0: USB hub found
[    3.257984] hub 1-1:1.0: 4 ports detected
[    3.260710] pcie_plda 2c000000.pcie: Port link down, exit.
[    3.282096] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully.
[    3.304537] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully.
[    3.315710] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[    3.326746] printk: console [ttyS0] disabled
[    3.351719] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 16, base_baud = 1500000) is a 16550A
[    3.361568] printk: console [ttyS0] enabled
[    3.370359] printk: bootconsole [uart0] disabled
[    3.381804] i2c 2-0045: Fixing up cyclic dependency with 295d0000.mipi
[    3.389408] at24 5-0050: supply vcc not found, using dummy regulator
[    3.396656] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    3.405372] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV
[    3.414787] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV
[    3.424389] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV
[    3.433838] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV
[    3.442572] i2c 6-0010: Fixing up cyclic dependency with 19800000.vin_sysctl
[    3.450095] imx219 6-0010: supply VANA not found, using dummy regulator
[    3.456883] imx219 6-0010: supply VDIG not found, using dummy regulator
[    3.463597] imx219 6-0010: supply VDDL not found, using dummy regulator
[    3.477772] imx219 6-0010: failed to read chip id 219
[    3.483082] imx219: probe of 6-0010 failed with error -5
[    3.488714] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter!
[    3.496856] jh7110-vin 19800000.vin_sysctl: stfcamss probe success!
[    3.505556] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode.
[    3.505942] jh7110-sec 16000000.crypto: Unbalanced pm_runtime_enable!
[    3.505953] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode.
[    3.505999] dwmmc_starfive 16020000.sdio1: Using internal DMA controller.
[    3.506011] dwmmc_starfive 16020000.sdio1: Version ID is 290a
[    3.506055] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 29,32 bit host data width,32 deep fifo
[    3.506187] mmc_host mmc1: card is polling.
[    3.512885] dwmmc_starfive 16010000.sdio0: Using internal DMA controller.
[    3.519522] jh7110-sec 16000000.crypto: will run requests pump with realtime priority
[    3.526563] dwmmc_starfive 16010000.sdio0: Version ID is 290a
[    3.526606] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 28,32 bit host data width,32 deep fifo
[    3.536755] jh7110-sec 16000000.crypto: Initialized
[    3.539265] mmc_host mmc0: card is non-removable.
[    3.549734] starfive-i2s 120b0000.i2stx_4ch0:  designware: play supported
[    3.599640] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin
[    3.605929] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 715
[    3.613230] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[    3.618813] sf-mipi-dphy-tx 295e0000.mipi-dphy: GET_AON_GP_REG
[    3.624661] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[    3.630242] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator
[    3.639817] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end
[    3.646730] of_cfs_init
[    3.649207] of_cfs_init: OK
[    3.652346] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493
[    3.663331] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.720730] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    3.770733] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    3.783466] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.795170] starfive soc:display-subsystem: bound 29400000.dc8200 (ops 0xffffffff80e73520)
[    3.804660] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.813391] cfg80211: failed to load regulatory.db
[    3.813866] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success
[    3.828513] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done.
[    3.835084] starfive soc:display-subsystem: bound 29590000.hdmi (ops 0xffffffff80e742d0)
[    3.843224] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000
[    3.849125] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00
[    3.855621] cdns-dsi 295d0000.mipi: ====starfive_dsi_bind end
[    3.861381] starfive soc:display-subsystem: bound 295d0000.mipi (ops 0xffffffff80e74bf8)
[    3.869480] vs-simple-encoder soc:rgb-output: encoder_bind begin
[    3.875512] no panel, -19
[    3.878137] vs-simple-encoder soc:rgb-output: encoder_bind error
[    3.884154] starfive soc:display-subsystem: bound soc:rgb-output (ops 0xffffffff80e73f18)
[    3.892346] vs-simple-encoder soc:dsi-output: encoder_bind begin
[    3.898369] no panel, -517
[    3.901089] vs-simple-encoder soc:dsi-output: encoder_bind error
[    3.907098] starfive soc:display-subsystem: bound soc:dsi-output (ops 0xffffffff80e73f18)
[    3.915707] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 1
[    3.973293] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 50000000Hz, actual 49500000HZ div = 2)
[    3.983329] mmc1: new high speed SDXC card at address 59b4
[    3.989952] mmcblk1: mmc1:59b4 EC1S5 59.7 GiB
[    3.997978] random: fast init done
[    4.006417]  mmcblk1: p1 p2 p3
[    4.220791] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 300000Hz, actual 300000HZ div = 330)
[    4.660818] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000Hz, actual 200000HZ div = 495)
[    5.110840] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 100000Hz, actual 100000HZ div = 990)
[    6.010795] ALSA device list:
[    6.013815]   #0: Starfive-Multi-Sound-Card
[    6.022341] Freeing unused kernel image (initmem) memory: 2188K
[    6.028625] Run /init as init process
[    6.032400]   with arguments:
[    6.032417]     /init
[    6.032430]   with environment:
[    6.032446]     HOME=/
[    6.032459]     TERM=linux
[    6.032473]     stmmaceth=chain_mode:1
[    6.032492]     selinux=0
[    6.967245] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    7.670380] systemd[1]: System time before build time, advancing clock.
[    7.757931] systemd[1]: systemd 251.2-5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    7.789938] systemd[1]: Detected architecture riscv64.
[    7.797636] systemd[1]: Hostname set to <starfive>.
[    8.297379] systemd[1]: Queued start job for default target Graphical Interface.
[    8.306926] systemd[1]: Created slice Slice /system/getty.
[    8.313254] systemd[1]: Created slice Slice /system/modprobe.
[    8.320466] systemd[1]: Created slice Slice /system/serial-getty.
[    8.327723] systemd[1]: Created slice User and Session Slice.
[    8.334726] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.343640] systemd[1]: Arbitrary Executable File Formats File System Automount Point was skipped because of a failed condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[    8.361195] systemd[1]: Reached target Local Integrity Protected Volumes.
[    8.369271] systemd[1]: Reached target Remote File Systems.
[    8.376146] systemd[1]: Reached target Slice Units.
[    8.382476] systemd[1]: Reached target Swaps.
[    8.388178] systemd[1]: Reached target Local Verity Protected Volumes.
[    8.397220] systemd[1]: Listening on Syslog Socket.
[    8.402482] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.416383] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[    8.428362] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.435584] systemd[1]: Listening on Journal Socket.
[    8.441896] systemd[1]: Listening on udev Control Socket.
[    8.448543] systemd[1]: Listening on udev Kernel Socket.
[    8.457028] systemd[1]: Mounting Huge Pages File System...
[    8.465269] systemd[1]: Mounting POSIX Message Queue File System...
[    8.474278] systemd[1]: Mounting Kernel Debug File System...
[    8.481112] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[    8.495074] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/5.15.0-starfive/modules.devname).
[    8.514354] systemd[1]: Starting Load Kernel Module configfs...
[    8.524330] systemd[1]: Starting Load Kernel Module drm...
[    8.532808] systemd[1]: Starting Load Kernel Module fuse...
[    8.544628] systemd[1]: Starting Journal Service...
[    8.572068] systemd[1]: Starting Load Kernel Modules...
[    8.581548] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.589283] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    8.603335] systemd[1]: Starting Coldplug All udev Devices...
[    8.615456] systemd[1]: Mounted Huge Pages File System.
[    8.622300] systemd[1]: Mounted POSIX Message Queue File System.
[    8.629645] systemd[1]: Mounted Kernel Debug File System.
[    8.636605] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    8.644429] systemd[1]: Finished Load Kernel Module configfs.
[    8.658110] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    8.666423] systemd[1]: Finished Load Kernel Module drm.
[    8.673666] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    8.681198] systemd[1]: Finished Load Kernel Module fuse.
[    8.688046] systemd[1]: Started Journal Service.
[    8.749967] systemd-journald[255]: Received client request to flush runtime journal.
[    8.785014] systemd-journald[255]: File /var/log/journal/e593f8ed757a4b42a5589c96d5395702/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    9.488750] systemd-journald[255]: Oldest entry in /var/log/journal/e593f8ed757a4b42a5589c96d5395702/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[    9.507586] systemd-journald[255]: /var/log/journal/e593f8ed757a4b42a5589c96d5395702/system.journal: Journal header limits reached or header out-of-date, rotating.
[    9.632146] jpu: loading out-of-tree module taints kernel.
[    9.633996] vdec: loading out-of-tree module taints kernel.
[    9.639871] SUCCESS alloc_chrdev_region
[    9.650412] vdec 130a0000.vpu_dec: device init.
[    9.656067] SUCCESS alloc_chrdev_region
[    9.662465] cnm_jpu 13090000.jpu: init device.
[    9.901107] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    9.901828] random: avahi-daemon: uninitialized urandom read (4 bytes read)
[   10.790162] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[   11.230196] starfive-eth-plat 16030000.ethernet eth0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[   11.241274] starfive-eth-plat 16030000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   11.259625] dwmac4: Master AXI performs fixed burst length
[   11.265199] starfive-eth-plat 16030000.ethernet eth0: No Safety Features support found
[   11.273197] starfive-eth-plat 16030000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   11.282499] starfive-eth-plat 16030000.ethernet eth0: configuring for phy/rgmii-id link mode
[   11.294290] starfive-eth-plat 16040000.ethernet eth1: PHY [stmmac-1:00] driver [YT8512B Ethernet] (irq=POLL)
[   11.304774] starfive-eth-plat 16040000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   11.313098] dwmac4: Master AXI performs fixed burst length
[   11.317166] random: alsactl: uninitialized urandom read (4 bytes read)
[   11.318611] starfive-eth-plat 16040000.ethernet eth1: No Safety Features support found
[   11.318627] starfive-eth-plat 16040000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   11.342098] starfive-eth-plat 16040000.ethernet eth1: configuring for phy/rgmii-id link mode
[   11.354455] starfive-eth-plat 16040000.ethernet eth1: Link is Up - 100Mbps/Full - flow control off
[   11.390090] random: lightdm: uninitialized urandom read (16 bytes read)
[   11.466281] random: alsactl: uninitialized urandom read (4 bytes read)
[   11.690727] random: crng init done
[   11.751752] vs_gem_dumb_create size = 1000
[   11.755914] Allocated coherent memory, vaddr: 0xFFFFFFE0FECC0770, paddr: 0x104A22000
[   11.763726] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   12.215873] PVR_K:  400: RGX Firmware image 'rgx.fw.36.50.54.182' loaded
[   12.301315] PVR_K:  400: Shader binary image 'rgx.sh.36.50.54.182' loaded
[   12.310620] PVR_K:  400: X connected - (devID = 0)
[   12.584825] vs_gem_dumb_create size = 7e9000
[   12.589720] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFC4000, paddr: 0x80200000
[   12.597405] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   12.636677] vs_gem_dumb_create size = 4000
[   12.640929] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFC09C0, paddr: 0x80108000
[   12.648586] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   12.654353] vs_gem_dumb_create size = 4000
[   12.658532] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFC0AA0, paddr: 0x8010C000
[   12.666205] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   13.571720] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate rate 148500000 tmdsclk 148500000
[   13.581331] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pixclock = 148500000
[   13.591104] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmdsclock = 148500000
[   13.600948] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->prediv = 1
[   13.609815] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->fbdiv = 99
[   13.618695] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmds_div_a = 1
[   13.627924] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmds_div_b = 1
[   13.637149] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmds_div_c = 1
[   13.646377] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_a = 1
[   13.655604] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_b = 2
[   13.664832] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_c = 2
[   13.674060] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_d = 2
[   13.683288] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->vco_div_5_en = 0
[   13.692697] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->fracdiv = 0
[   13.701671] innohdmi-starfive 29590000.hdmi: *******************************************************
[   13.710813] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->tmdsclock = 148500000
[   13.720734] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->prediv = 1
[   13.729693] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->fbdiv = 20
[   13.738665] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->postdiv = 1
[   13.747726] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->post_div_en = 3
[   13.757134] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->version = 3
root@starfive:~#

Starting DHCP server: FAIL

Welcome to Buildroot
buildroot login: root
Password:
# uname -a
Linux buildroot 5.15.0 #1 SMP Sun Dec 25 20:59:22 CST 2022 riscv64 GNU/Linux
# apt
-sh: apt: not found
# df
Filesystem           1K-blocks      Used Available Use% Mounted on
devtmpfs          `    1669016         0   1669016   0% /dev
tmpfs          `  `    1993648      `  0  `1993648   0% /dev/shm
tmpfs          `  ``   1993648        64   1993584   0% /tmp
tmpfs          `  `   `1993648       196   1993452   0% /run
/dev/mmcblk1p4      ` ` 69346    245002    194648  56% /
#

# dmesg
[    0.000000] Linux version 5.15.0 (jenkins@soft05) (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot VF2_v2.5.0) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Sun Dec 25 20:59:22 CST 2022
[    0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[    0.000000] Machine model: StarFive VisionFive V2
[    0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[    0.000000] printk: bootconsole [sbi0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000c010ffff]
[    0.000000]   node   0: [mem 0x00000000c0110000-0x00000000c01fffff]
[    0.000000]   node   0: [mem 0x00000000c0200000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000013fffffff]
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10000
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI v0.2 HSM extension detected
[    0.000000] CPU with hartid=0 is not available
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv: ISA extensions acdfim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] percpu: Embedded 17 pages/cpu s31528 r8192 d29912 u69632
[    0.000000] pcpu-alloc: s31528 r8192 d29912 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1033735
[    0.000000] Kernel command line: earlyprintk console=ttyS0,115200 debug rootwait earlycon=sbi root=/dev/mmcblk1p4
[    0.000000] Unknown command line parameters: earlyprintk
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3338036K/4192256K available (9878K kernel code, 4982K rwdata, 4096K rodata, 2191K init, 401K bss, 329932K reserved, 524288K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu:     RCU debug extended QS entry/exit.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts.
[    0.000000] random: get_random_bytes called from start_kernel+0x4d0/0x6e2 with crng_init=0
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [3]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns
[    0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns
[    0.008207] clocksource: timer@13050000.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.018416] clocksource: timer@13050000.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.028737] clocksource: timer@13050000.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.039044] clocksource: timer@13050000.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.049493] Console: colour dummy device 80x25
[    0.053893] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000)
[    0.064089] pid_max: default: 32768 minimum: 301
[    0.068920] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.076318] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.085379] ASID allocator disabled
[    0.088882] rcu: Hierarchical SRCU implementation.
[    0.093794] EFI services will not be available.
[    0.098582] smp: Bringing up secondary CPUs ...
[    0.104458] smp: Brought up 1 node, 4 CPUs
[    0.109521] devtmpfs: initialized
[    0.118784] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.128559] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.148220] pinctrl core: initialized pinctrl subsystem
[    0.154189] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.160600] cpuidle: using governor menu
[    0.181977] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200
[    0.190170] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output
[    0.198067] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200
[    0.215374] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.222021] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.231460] vgaarb: loaded
[    0.234304] SCSI subsystem initialized
[    0.238091] libata version 3.00 loaded.
[    0.242011] usbcore: registered new interface driver usbfs
[    0.247462] usbcore: registered new interface driver hub
[    0.252810] usbcore: registered new device driver usb
[    0.258230] mc: Linux media interface: v0.10
[    0.262431] videodev: Linux video capture interface: v2.00
[    0.268126] Advanced Linux Sound Architecture Driver Initialized.
[    0.274452] Bluetooth: Core ver 2.22
[    0.277965] NET: Registered PF_BLUETOOTH protocol family
[    0.283315] Bluetooth: HCI device and connection manager initialized
[    0.289740] Bluetooth: HCI socket layer initialized
[    0.294672] Bluetooth: L2CAP socket layer initialized
[    0.299800] Bluetooth: SCO socket layer initialized
[    0.304985] clocksource: Switched to clocksource riscv_clocksource
[    0.316941] NET: Registered PF_INET protocol family
[    0.322381] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.332924] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear)
[    0.341481] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.349724] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.358126] TCP: Hash tables configured (established 32768 bind 32768)
[    0.364831] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.371792] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.379358] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.385460] RPC: Registered named UNIX socket transport module.
[    0.391302] RPC: Registered udp transport module.
[    0.396086] RPC: Registered tcp transport module.
[    0.400834] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.407928] PCI: CLS 0 bytes, default 64
[    0.412310] Initialise system trusted keyrings
[    0.416845] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    0.417043] Unpacking initramfs...
[    0.428050] NFS: Registering the id_resolver key type
[    0.433040] Key type id_resolver registered
[    0.437306] Key type id_legacy registered
[    0.441427] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.448133] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.455616] ntfs: driver 2.1.32 [Flags: R/W].
[    0.460206] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc.
[    0.466609] fuse: init (API version 7.34)
[    0.502722] NET: Registered PF_ALG protocol family
[    0.507481] Key type asymmetric registered
[    0.511608] Asymmetric key parser 'x509' registered
[    0.516645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.524002] io scheduler mq-deadline registered
[    0.528621] io scheduler kyber registered
[    0.533253] start plist test
[    0.538623] end plist test
[    0.621657] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully.
[    0.631893] L2CACHE: DataError @ 0x00000000.080400F8
[    0.636868] L2CACHE: DataFail @ 0x00000000.0804005B
[    0.641801] L2CACHE: No. of Banks in the cache: 8
[    0.646512] L2CACHE: No. of ways per bank: 16
[    0.650916] L2CACHE: Sets per bank: 256
[    0.654816] L2CACHE: Bytes per cache block: 64
[    0.659342] L2CACHE: Index of the largest way enabled: 15
[    0.665131] jh7110-pmu 17030000.power-controller: registered 8 power domains
[    0.733104] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.742249] @@#########################@@
[    0.784445] @@ dev ptr:ffffffe0bfee0000/1500/1
[    0.789085] PVR_K:  1: Read BVNC 36.50.54.182 from HW device registers
[    0.795622] PVR_K:  1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system
[    0.804932] [drm] Initialized pvr 1.17.6210866 20170530 for 18000000.gpu on minor 0
[    0.821652] loop: module loaded
[    0.827242] spi-nor spi0.0: gd25lq128d (16384 Kbytes)
[    6.163101] Initramfs unpacking failed: invalid magic at start of compressed archive
[    6.335156] Freeing initrd memory: 122788K
[    6.350721] 3 fixed-partitions partitions found on MTD device 13010000.spi.0
[    6.357746] Creating 3 MTD partitions on "13010000.spi.0":
[    6.363263] 0x000000000000-0x000000020000 : "spl"
[    6.369876] 0x000000100000-0x000000400000 : "uboot"
[    6.376294] 0x000000f00000-0x000001000000 : "data"
[    6.383678] libphy: Fixed MDIO Bus: probed
[    6.389233] CAN device driver interface
[    6.393580] starfive-eth-plat 16030000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    6.403898] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    6.411332] starfive-eth-plat 16030000.ethernet:     DWMAC4/5
[    6.416867] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported
[    6.424738] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported
[    6.432635] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported
[    6.439481] starfive-eth-plat 16030000.ethernet: TSO supported
[    6.445375] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.453773] starfive-eth-plat 16030000.ethernet: Enabled Flow TC (entries=1)
[    6.460890] starfive-eth-plat 16030000.ethernet: TSO feature enabled
[    6.467302] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width
[    6.716361] libphy: stmmac: probed
[    6.719701] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    6.729693] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    6.740838] starfive-eth-plat 16040000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    6.751143] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    6.758574] starfive-eth-plat 16040000.ethernet:     DWMAC4/5
[    6.764097] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported
[    6.771996] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported
[    6.779881] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported
[    6.786728] starfive-eth-plat 16040000.ethernet: TSO supported
[    6.792608] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.801034] starfive-eth-plat 16040000.ethernet: Enabled Flow TC (entries=1)
[    6.808137] starfive-eth-plat 16040000.ethernet: TSO feature enabled
[    6.814536] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width
[    7.062390] libphy: stmmac: probed
[    7.065758] YT8512B Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[    7.075101] YT8512B Ethernet stmmac-1:03: attached PHY driver (mii_bus:phy_addr=stmmac-1:03, irq=POLL)
[    7.085971] Intel(R) Wireless WiFi driver for Linux
[    7.092653] cdns3-starfive 10210000.usbdrd: usb mode 2 2.0 probe success
[    7.100068] usbcore: registered new interface driver uas
[    7.105381] usbcore: registered new interface driver usb-storage
[    7.125324] starfive-rtc 17040000.rtc: registered as rtc0
[    7.130661] starfive-rtc 17040000.rtc: setting system clock to 2001-01-01T00:00:00 UTC (978307200)
[    7.139816] i2c_dev: i2c /dev entries driver
[    7.144258] usbcore: registered new interface driver uvcvideo
[    7.151107] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500)
[    7.159926] Bluetooth: HCI UART driver ver 2.3
[    7.164299] Bluetooth: HCI UART protocol H4 registered
[    7.169730] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to get regulator for cpu!
[    7.177948] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to init starfive cpu dvfs info
[    7.187226] sdhci: Secure Digital Host Controller Interface driver
[    7.193340] sdhci: Copyright(c) Pierre Ossman
[    7.197808] Synopsys Designware Multimedia Card Interface Driver
[    7.204133] sdhci-pltfm: SDHCI platform and OF driver helper
[    7.210534] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel
[    7.218766] jh7110-sec 16000000.crypto: Cannot initial dma chan
[    7.225021] usbcore: registered new interface driver usbhid
[    7.230525] usbhid: USB HID core driver
[    7.234668] usbcore: registered new interface driver snd-usb-audio
[    7.244078] NET: Registered PF_PACKET protocol family
[    7.249105] can: controller area network core
[    7.253577] NET: Registered PF_CAN protocol family
[    7.258352] can: raw protocol
[    7.261374] can: broadcast manager protocol
[    7.265654] can: netlink gateway - max_hops=1
[    7.270319] Bluetooth: RFCOMM TTY layer initialized
[    7.275156] Bluetooth: RFCOMM socket layer initialized
[    7.280348] Bluetooth: RFCOMM ver 1.11
[    7.284174] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.289527] Bluetooth: BNEP filters: protocol multicast
[    7.294807] Bluetooth: BNEP socket layer initialized
[    7.300037] 9pnet: Installing 9P2000 support
[    7.304298] Key type dns_resolver registered
[    7.309315] Loading compiled-in X.509 certificates
[    7.349770] starfive_jh7110-pinctrl 13040000.gpio: SiFive GPIO chip registered 64 GPIOs
[    7.358542] starfive_jh7110-pinctrl 17020000.gpio: SiFive GPIO chip registered 4 GPIOs
[    7.366630] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels
[    7.373710] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels
[    7.382563] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present!
[    7.390808] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 23
[    7.398152] ssp-pl022 10060000.spi: ARM PL022 driver for StarFive SoC platform, device ID: 0x00041022
[    7.407335] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to (____ptrval____)
[    7.416616] ssp-pl022 10060000.spi: Requested frequency: 10000000 Hz is unsupported,select by default 8250000 Hz
[    7.427123] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms
[    7.436132] i2c 2-0045: Fixing up cyclic dependency with 295d0000.mipi
[    7.442852] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00
[    7.449451] i2c 2-0019: Fixing up cyclic dependency with 295d0000.mipi
[    7.457354] at24 5-0050: supply vcc not found, using dummy regulator
[    7.464420] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    7.472982] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV
[    7.482264] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV
[    7.491702] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV
[    7.500980] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV
[    7.509530] i2c 6-0010: Fixing up cyclic dependency with 19800000.vin_sysctl
[    7.516925] imx219 6-0010: supply VANA not found, using dummy regulator
[    7.523594] imx219 6-0010: supply VDIG not found, using dummy regulator
[    7.530237] imx219 6-0010: supply VDDL not found, using dummy regulator
[    7.544306] imx219 6-0010: failed to read chip id 219
[    7.549516] imx219: probe of 6-0010 failed with error -5
[    7.557305] pcie_plda 2b000000.pcie: host bridge /soc/pcie@2B000000 ranges:
[    7.564244] pcie_plda 2b000000.pcie:      MEM 0x0030000000..0x0037ffffff -> 0x0030000000
[    7.572409] pcie_plda 2b000000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    7.580567] ATR entry: 0x0940000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    7.588333] ATR entry: 0x0030000000 -> 0x0030000000 [0x0008000000] (param: 0x000000)
[    7.596119] ATR entry: 0x0900000000 -> 0x0900000000 [0x0040000000] (param: 0x000000)
[    7.945086] pcie_plda 2b000000.pcie: Port link up.
[    7.949963] pcie_plda 2b000000.pcie: PCI host bridge to bus 0000:00
[    7.956182] pci_bus 0000:00: root bus resource [bus 00-ff]
[    7.961705] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    7.968653] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
[    7.976220] pci 0000:00:00.0: [1556:1111] type 01 class 0x060400
[    7.982255] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref]
[    7.989597] pci 0000:00:00.0: supports D1 D2
[    7.993858] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    8.004020] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    8.012105] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    8.018068] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    8.024966] pci 0000:01:00.0: PME# supported from D0 D3cold
[    8.033819] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    8.040414] pci 0000:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref]
[    8.048093] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref]
[    8.056154] pci 0000:00:00.0: BAR 8: assigned [mem 0x30000000-0x300fffff]
[    8.062990] pci 0000:01:00.0: BAR 0: assigned [mem 0x30000000-0x30000fff 64bit]
[    8.070377] pci 0000:00:00.0: PCI bridge to [bus 01]
[    8.075394] pci 0000:00:00.0:   bridge window [mem 0x30000000-0x300fffff]
[    8.082330] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    8.087968] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    8.093697] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x9d4 took 11109 usecs
[    8.101345] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    8.106537] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    8.114362] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[    8.123534] pcie_plda 2b000000.pcie: msi#0 address_hi 0x0 address_lo 0x190
[    8.130747] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    8.135929] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    8.143361] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    8.150455] hub 1-0:1.0: USB hub found
[    8.154164] hub 1-0:1.0: 1 port detected
[    8.159175] hub 2-0:1.0: USB hub found
[    8.162884] hub 2-0:1.0: 4 ports detected
[    8.169690] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges:
[    8.176646] pcie_plda 2c000000.pcie:      MEM 0x0038000000..0x003fffffff -> 0x0038000000
[    8.184755] pcie_plda 2c000000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    8.192956] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    8.200713] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000)
[    8.208504] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000)
[    8.375033] usb usb2-port2: over-current condition
[    8.475048] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    8.535067] usb usb2-port4: over-current condition
[    8.645256] pcie_plda 2c000000.pcie: Port link down, exit.
[    8.664394] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully.
[    8.666191] hub 1-1:1.0: USB hub found
[    8.683633] hub 1-1:1.0: 4 ports detected
[    8.685694] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully.
[    8.697845] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[    8.707898] printk: console [ttyS0] disabled
[    8.732341] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 17, base_baud = 1500000) is a 16550A
[    8.741251] printk: console [ttyS0] enabled
[    8.749550] printk: bootconsole [sbi0] disabled
[    8.759171] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter!
[    8.767285] jh7110-vin 19800000.vin_sysctl: stfcamss probe success!
[    8.776062] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode.
[    8.776520] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode.
[    8.783348] dwmmc_starfive 16010000.sdio0: Using internal DMA controller.
[    8.790619] dwmmc_starfive 16020000.sdio1: Using internal DMA controller.
[    8.797391] dwmmc_starfive 16010000.sdio0: Version ID is 290a
[    8.804178] dwmmc_starfive 16020000.sdio1: Version ID is 290a
[    8.809968] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 29,32 bit host data width,32 deep fifo
[    8.810081] jh7110-sec 16000000.crypto: will run requests pump with realtime priority
[    8.813252] jh7110-sec 16000000.crypto: Initialized
[    8.814330] starfive-i2s 120b0000.i2stx_4ch0:  designware: play supported
[    8.814340] starfive-i2s 120b0000.i2stx_4ch0: designware: i2s master mode supported
[    8.814517] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin
[    8.814530] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 445
[    8.814656] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[    8.814676] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator
[    8.814961] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end
[    8.815177] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000
[    8.815414] cdns-dsi 295d0000.mipi: starfive dsi bind end
[    8.815749] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 30,32 bit host data width,32 deep fifo
[    8.817635] of_cfs_init
[    8.817676] of_cfs_init: OK
[    8.818197] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493
[    8.818696] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.825533] mmc_host mmc0: card is non-removable.
[    8.833373] mmc_host mmc1: card is polling.
[    8.929459] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.948766] starfive soc:display-subsystem: bound 29400000.dc8200 (ops 0xffffffff80e75b38)
[    8.957085] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin
[    8.963977] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    8.972619] cfg80211: failed to load regulatory.db
[    8.972931] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success
[    8.987563] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done.
[    8.994127] innohdmi-starfive 29590000.hdmi: inno hdmi bind end
[    9.000087] starfive soc:display-subsystem: bound 29590000.hdmi (ops 0xffffffff80e768e8)
[    9.008196] vs-simple-encoder soc:dsi-output: encoder_bind begin
[    9.014217] no panel, -517
[    9.016930] vs-simple-encoder soc:dsi-output: encoder_bind error
[    9.022932] starfive soc:display-subsystem: bound soc:dsi-output (ops 0xffffffff80e76530)
[    9.031555] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 1
[    9.055005] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    9.145059] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    9.290157] random: fast init done
[    9.397446] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 50000000Hz, actual 49500000HZ div = 2)
[    9.408322] mmc1: new high speed SDXC card at address 59b4
[    9.415198] mmcblk1: mmc1:59b4 ED2S5 119 GiB
[    9.428259]  mmcblk1: p1 p2 p3 p4
[    9.505093] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 300000Hz, actual 300000HZ div = 330)
[    9.945051] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000Hz, actual 200000HZ div = 495)
[   10.395102] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 100000Hz, actual 100000HZ div = 990)
[   11.055070] ALSA device list:
[   11.058064]   #0: Starfive-PWMDAC-Sound-Card
[   11.062364]   #1: Starfive-HDMI-Sound-Card
[   11.071575] Freeing unused kernel image (initmem) memory: 2188K
[   11.077824] Run /init as init process
[   11.081513]   with arguments:
[   11.084498]     /init
[   11.086825]     earlyprintk
[   11.089640]   with environment:
[   11.092804]     HOME=/
[   11.095211]     TERM=linux
[   11.218169] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   11.784545] EXT4-fs (mmcblk1p4): re-mounted. Opts: (null). Quota mode: disabled.
[   12.264121] udevd[221]: starting version 3.2.10
[   12.280697] random: udevd: uninitialized urandom read (16 bytes read)
[   12.288433] random: udevd: uninitialized urandom read (16 bytes read)
[   12.294947] random: udevd: uninitialized urandom read (16 bytes read)
[   12.355311] udevd[222]: starting eudev-3.2.10
[   12.470759] jpu: loading out-of-tree module taints kernel.
[   12.479700] vdec 130a0000.vpu_dec: device init.
[   12.482697] cnm_jpu 13090000.jpu: init device.
[   12.484250] SUCCESS alloc_chrdev_region
[   12.484633] SUCCESS alloc_chrdev_region
[   13.172744] starfive-eth-plat 16030000.ethernet eth0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[   13.184615] starfive-eth-plat 16030000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   13.203187] dwmac4: Master AXI performs fixed burst length
[   13.208732] starfive-eth-plat 16030000.ethernet eth0: No Safety Features support found
[   13.218053] starfive-eth-plat 16030000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   13.227963] starfive-eth-plat 16030000.ethernet eth0: configuring for phy/rgmii-id link mode
[   13.238746] starfive-eth-plat 16040000.ethernet eth1: PHY [stmmac-1:00] driver [YT8512B Ethernet] (irq=POLL)
[   13.248829] starfive-eth-plat 16040000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   13.257127] dwmac4: Master AXI performs fixed burst length
[   13.262625] starfive-eth-plat 16040000.ethernet eth1: No Safety Features support found
[   13.270565] starfive-eth-plat 16040000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   13.281166] starfive-eth-plat 16040000.ethernet eth1: configuring for phy/rgmii-id link mode
[   13.292204] starfive-eth-plat 16040000.ethernet eth1: Link is Up - 100Mbps/Full - flow control off
[   38.975439] mipi_0p9: disabling
[  163.455196] random: crng init done
[  163.458654] random: 7 urandom warning(s) missed due to ratelimiting
#

root@starfive:~# cat /proc/mtd
cat: /proc/mtd: No such file or directory
root@starfive:~#

root@starfive:~# apt install mtd-utils
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  libiniparser1 liblzo2-2
The following NEW packages will be installed:
  libiniparser1 liblzo2-2 mtd-utils
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 303 kB of archives.
After this operation, 1275 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
＜略＞
root@starfive:~# 

root@starfive:~# ls -l /dev/*mtd*
ls: cannot access '/dev/*mtd*': No such file or directory
root@starfive:~#

# ls -l /dev/mtd*
crw-------    1 root     root       90,   0 Jan  1 00:00 /dev/mtd0
crw-------    1 root     root       90,   1 Jan  1 00:00 /dev/mtd0ro
crw-------    1 root     root       90,   2 Jan  1 00:00 /dev/mtd1
crw-------    1 root     root       90,   3 Jan  1 00:00 /dev/mtd1ro
crw-------    1 root     root       90,   4 Jan  1 00:00 /dev/mtd2
crw-------    1 root     root      `90,   5 Jan  1 00:00 /dev/mtd2ro
brw-rw----    1 root     disk       31,   0 Jan  1 00:00 /dev/mtdblock0
brw-rw----    1 root     disk       31,   1 Jan  1 00:00 /dev/mtdblock1
brw-rw----    1 root     disk       31,   2 Jan  1 00:00 /dev/mtdblock2
# ls -l /proc/mtd*
-r--r--r--    1 root     root          `  0 Jan  1 00:09 /proc/mtd
#

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00020000 00001000 "spl"
mtd1: 00300000 00001000 "uboot"
mtd2: 00100000 00001000 "data"
#

# flashcp

Flash Copy - Written by Abraham van der Merwe <abraham@2d3d.co.za>

usage: flashcp [ -v | --verbose | -A | --erase-all ] <filename> <device>
       flashcp -h | --help
       flashcp -V | --version

   -h | --help      Show this help message
   -v | --verbose   Show progress reports
   -p | --partition Only copy different block from file to device
   -A | --erase-all Erases the whole device regardless of the image size
   -V | --version   Show version information and exit
   <filename>       File which you want to copy to flash
   <device>         Flash device to write to (e.g. /dev/mtd0, /dev/mtd1, etc.)

#

# wget https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.5.0
/visionfive2_fw_payload.img
wget: not an http or ftp url: https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.5.0/visionfive2_fw_payload.img
# curl -O https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.
5.0/visionfive2_fw_payload.img
-sh: curl: not found
#

# ls -l
total 2916
drwxr-xr-x    2 root     root          1024 Dec 25  2022 ISP
drwxr-xr-x    2 root     root          1024 Dec 25  2022 e24
drwxr-xr-x    2 root     root          1024 Dec 25  2022 mailbox
-rwxrwxrwx    1 root     root         22984 Dec 25  2022 mjpeg_dec_test
-rwxr-xr-x    1 root     root           123 Dec 25  2022 run_weston.sh
-rw-------    1 root     root        127816 Dec 30  2022 u-boot-spl.bin.normal.out
-rwxr-xr-x    1 root     root          2894 Dec 25  2022 usb_device.sh
-rwxrwxrwx    1 root     root         18768 Dec 25  2022 video_dec_test
-rwxrwxrwx    1 root     root         18808 Dec 25  2022 video_enc_test
-rw-------    1 root     root       2793045 Dec 30  2022 visionfive2_fw_payload.img
#

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00020000 00001000 "spl"
mtd1: 00300000 00001000 "uboot"
mtd2: 00100000 00001000 "data"
# flashcp -v u-boot-spl.bin.normal.out /dev/mtd0
Erasing blocks: 32/32 (100%)
Writing data: 124k/124k (100%)
Verifying data: 124k/124k (100%)
# flashcp -v visionfive2_fw_payload.img /dev/mtd1
Erasing blocks: 682/682 (100%)
Writing data: 2727k/2727k (100%)
Verifying data: 2727k/2727k (100%)
#

# dmesg
[    0.000000] Linux version 5.15.0 (jenkins@soft05) (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot VF2_v2.5.0) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Sun Dec 25 20:59:22 CST 2022
[    0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[    0.000000] Machine model: StarFive VisionFive V2
[    0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[    0.000000] printk: bootconsole [sbi0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000c010ffff]
[    0.000000]   node   0: [mem 0x00000000c0110000-0x00000000c01fffff]
[    0.000000]   node   0: [mem 0x00000000c0200000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000013fffffff]
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10000
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI v0.2 HSM extension detected
[    0.000000] CPU with hartid=0 is not available
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv: ISA extensions acdfim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] percpu: Embedded 17 pages/cpu s31528 r8192 d29912 u69632
[    0.000000] pcpu-alloc: s31528 r8192 d29912 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1033735
[    0.000000] Kernel command line: earlyprintk console=ttyS0,115200 debug rootwait earlycon=sbi root=/dev/mmcblk1p4
[    0.000000] Unknown command line parameters: earlyprintk
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3338036K/4192256K available (9878K kernel code, 4982K rwdata, 4096K rodata, 2191K init, 401K bss, 329932K reserved, 524288K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu:     RCU debug extended QS entry/exit.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts.
[    0.000000] random: get_random_bytes called from start_kernel+0x4d0/0x6e2 with crng_init=0
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns
[    0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns
[    0.008243] clocksource: timer@13050000.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.018466] clocksource: timer@13050000.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.028787] clocksource: timer@13050000.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.039094] clocksource: timer@13050000.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.049571] Console: colour dummy device 80x25
[    0.053981] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000)
[    0.064174] pid_max: default: 32768 minimum: 301
[    0.069014] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.076409] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.085655] ASID allocator disabled
[    0.089175] rcu: Hierarchical SRCU implementation.
[    0.094094] EFI services will not be available.
[    0.098933] smp: Bringing up secondary CPUs ...
[    0.105034] smp: Brought up 1 node, 4 CPUs
[    0.110198] devtmpfs: initialized
[    0.120823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.130607] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.151166] pinctrl core: initialized pinctrl subsystem
[    0.157205] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.163734] cpuidle: using governor menu
[    0.189221] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200
[    0.197521] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output
[    0.205502] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200
[    0.225091] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.231717] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.241655] vgaarb: loaded
[    0.244522] SCSI subsystem initialized
[    0.248336] libata version 3.00 loaded.
[    0.252291] usbcore: registered new interface driver usbfs
[    0.257734] usbcore: registered new interface driver hub
[    0.263186] usbcore: registered new device driver usb
[    0.268474] mc: Linux media interface: v0.10
[    0.272682] videodev: Linux video capture interface: v2.00
[    0.278405] Advanced Linux Sound Architecture Driver Initialized.
[    0.284794] Bluetooth: Core ver 2.22
[    0.288327] NET: Registered PF_BLUETOOTH protocol family
[    0.293660] Bluetooth: HCI device and connection manager initialized
[    0.300090] Bluetooth: HCI socket layer initialized
[    0.305017] Bluetooth: L2CAP socket layer initialized
[    0.310149] Bluetooth: SCO socket layer initialized
[    0.315356] clocksource: Switched to clocksource riscv_clocksource
[    0.328581] NET: Registered PF_INET protocol family
[    0.334031] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.345382] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear)
[    0.353945] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.362230] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.370743] TCP: Hash tables configured (established 32768 bind 32768)
[    0.377469] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.384379] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.391965] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.398209] RPC: Registered named UNIX socket transport module.
[    0.404055] RPC: Registered udp transport module.
[    0.408845] RPC: Registered tcp transport module.
[    0.413588] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.420816] PCI: CLS 0 bytes, default 64
[    0.425299] Initialise system trusted keyrings
[    0.425704] Unpacking initramfs...
[    0.433863] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    0.446313] NFS: Registering the id_resolver key type
[    0.451332] Key type id_resolver registered
[    0.455558] Key type id_legacy registered
[    0.459703] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.466391] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.473864] ntfs: driver 2.1.32 [Flags: R/W].
[    0.478533] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc.
[    0.484997] fuse: init (API version 7.34)
[    0.528448] NET: Registered PF_ALG protocol family
[    0.533184] Key type asymmetric registered
[    0.537378] Asymmetric key parser 'x509' registered
[    0.542368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.549756] io scheduler mq-deadline registered
[    0.554323] io scheduler kyber registered
[    0.558889] start plist test
[    0.565866] end plist test
[    0.663691] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully.
[    0.673946] L2CACHE: DataError @ 0x00000000.08040140
[    0.678932] L2CACHE: DataFail @ 0x00000000.08040074
[    0.683854] L2CACHE: No. of Banks in the cache: 8
[    0.688569] L2CACHE: No. of ways per bank: 16
[    0.692969] L2CACHE: Sets per bank: 256
[    0.696883] L2CACHE: Bytes per cache block: 64
[    0.701375] L2CACHE: Index of the largest way enabled: 15
[    0.707164] jh7110-pmu 17030000.power-controller: registered 8 power domains
[    0.775324] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.784547] @@#########################@@
[    0.826674] @@ dev ptr:ffffffe0bfee0000/1500/1
[    0.831285] PVR_K:  1: Read BVNC 36.50.54.182 from HW device registers
[    0.837831] PVR_K:  1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system
[    0.847130] [drm] Initialized pvr 1.17.6210866 20170530 for 18000000.gpu on minor 0
[    0.863772] loop: module loaded
[    0.869330] spi-nor spi0.0: gd25lq128d (16384 Kbytes)
[    6.207313] Initramfs unpacking failed: invalid magic at start of compressed archive
[    6.382120] Freeing initrd memory: 122788K
[    6.397795] 3 fixed-partitions partitions found on MTD device 13010000.spi.0
[    6.404786] Creating 3 MTD partitions on "13010000.spi.0":
[    6.410373] 0x000000000000-0x000000020000 : "spl"
[    6.416957] 0x000000100000-0x000000400000 : "uboot"
[    6.423312] 0x000000f00000-0x000001000000 : "data"
[    6.430679] libphy: Fixed MDIO Bus: probed
[    6.436258] CAN device driver interface
[    6.440613] starfive-eth-plat 16030000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    6.450922] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    6.458349] starfive-eth-plat 16030000.ethernet:     DWMAC4/5
[    6.463877] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported
[    6.471776] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported
[    6.479660] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported
[    6.486512] starfive-eth-plat 16030000.ethernet: TSO supported
[    6.492389] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.500811] starfive-eth-plat 16030000.ethernet: Enabled Flow TC (entries=1)
[    6.507917] starfive-eth-plat 16030000.ethernet: TSO feature enabled
[    6.514316] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width
[    6.763129] libphy: stmmac: probed
[    6.766500] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    6.776447] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    6.787641] starfive-eth-plat 16040000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    6.797953] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    6.805384] starfive-eth-plat 16040000.ethernet:     DWMAC4/5
[    6.810907] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported
[    6.818806] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported
[    6.826691] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported
[    6.833525] starfive-eth-plat 16040000.ethernet: TSO supported
[    6.839431] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.847844] starfive-eth-plat 16040000.ethernet: Enabled Flow TC (entries=1)
[    6.854933] starfive-eth-plat 16040000.ethernet: TSO feature enabled
[    6.861359] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width
[    7.109746] libphy: stmmac: probed
[    7.113084] YT8512B Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[    7.122471] YT8512B Ethernet stmmac-1:03: attached PHY driver (mii_bus:phy_addr=stmmac-1:03, irq=POLL)
[    7.133324] Intel(R) Wireless WiFi driver for Linux
[    7.140053] cdns3-starfive 10210000.usbdrd: usb mode 2 2.0 probe success
[    7.147467] usbcore: registered new interface driver uas
[    7.152754] usbcore: registered new interface driver usb-storage
[    7.159535] starfive-rtc 17040000.rtc: registered as rtc0
[    7.164871] starfive-rtc 17040000.rtc: setting system clock to 2001-01-01T00:33:55 UTC (978309235)
[    7.174030] i2c_dev: i2c /dev entries driver
[    7.178493] usbcore: registered new interface driver uvcvideo
[    7.185331] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500)
[    7.194156] Bluetooth: HCI UART driver ver 2.3
[    7.198551] Bluetooth: HCI UART protocol H4 registered
[    7.203940] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to get regulator for cpu!
[    7.212154] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to init starfive cpu dvfs info
[    7.221439] sdhci: Secure Digital Host Controller Interface driver
[    7.227571] sdhci: Copyright(c) Pierre Ossman
[    7.232004] Synopsys Designware Multimedia Card Interface Driver
[    7.238377] sdhci-pltfm: SDHCI platform and OF driver helper
[    7.244755] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel
[    7.252976] jh7110-sec 16000000.crypto: Cannot initial dma chan
[    7.259237] usbcore: registered new interface driver usbhid
[    7.264741] usbhid: USB HID core driver
[    7.268901] usbcore: registered new interface driver snd-usb-audio
[    7.278417] NET: Registered PF_PACKET protocol family
[    7.283413] can: controller area network core
[    7.287943] NET: Registered PF_CAN protocol family
[    7.292678] can: raw protocol
[    7.295732] can: broadcast manager protocol
[    7.299963] can: netlink gateway - max_hops=1
[    7.304665] Bluetooth: RFCOMM TTY layer initialized
[    7.309511] Bluetooth: RFCOMM socket layer initialized
[    7.314692] Bluetooth: RFCOMM ver 1.11
[    7.318535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.323859] Bluetooth: BNEP filters: protocol multicast
[    7.329172] Bluetooth: BNEP socket layer initialized
[    7.334351] 9pnet: Installing 9P2000 support
[    7.338620] Key type dns_resolver registered
[    7.343642] Loading compiled-in X.509 certificates
[    7.384232] starfive_jh7110-pinctrl 13040000.gpio: SiFive GPIO chip registered 64 GPIOs
[    7.392927] starfive_jh7110-pinctrl 17020000.gpio: SiFive GPIO chip registered 4 GPIOs
[    7.401023] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels
[    7.408123] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels
[    7.416958] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present!
[    7.425182] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 23
[    7.432547] ssp-pl022 10060000.spi: ARM PL022 driver for StarFive SoC platform, device ID: 0x00041022
[    7.441730] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to (____ptrval____)
[    7.451001] ssp-pl022 10060000.spi: Requested frequency: 10000000 Hz is unsupported,select by default 8250000 Hz
[    7.461503] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms
[    7.470525] i2c 2-0045: Fixing up cyclic dependency with 295d0000.mipi
[    7.477283] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00
[    7.483851] i2c 2-0019: Fixing up cyclic dependency with 295d0000.mipi
[    7.491738] at24 5-0050: supply vcc not found, using dummy regulator
[    7.498857] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    7.507724] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV
[    7.516993] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV
[    7.526409] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV
[    7.535688] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV
[    7.544222] i2c 6-0010: Fixing up cyclic dependency with 19800000.vin_sysctl
[    7.551632] imx219 6-0010: supply VANA not found, using dummy regulator
[    7.558321] imx219 6-0010: supply VDIG not found, using dummy regulator
[    7.564921] imx219 6-0010: supply VDDL not found, using dummy regulator
[    7.579037] imx219 6-0010: failed to read chip id 219
[    7.584227] imx219: probe of 6-0010 failed with error -5
[    7.592001] pcie_plda 2b000000.pcie: host bridge /soc/pcie@2B000000 ranges:
[    7.598976] pcie_plda 2b000000.pcie:      MEM 0x0030000000..0x0037ffffff -> 0x0030000000
[    7.607084] pcie_plda 2b000000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    7.615243] ATR entry: 0x0940000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    7.623021] ATR entry: 0x0030000000 -> 0x0030000000 [0x0008000000] (param: 0x000000)
[    7.630814] ATR entry: 0x0900000000 -> 0x0900000000 [0x0040000000] (param: 0x000000)
[    7.985453] pcie_plda 2b000000.pcie: Port link up.
[    7.990332] pcie_plda 2b000000.pcie: PCI host bridge to bus 0000:00
[    7.996551] pci_bus 0000:00: root bus resource [bus 00-ff]
[    8.002074] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    8.009025] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
[    8.016589] pci 0000:00:00.0: [1556:1111] type 01 class 0x060400
[    8.022624] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref]
[    8.029962] pci 0000:00:00.0: supports D1 D2
[    8.034226] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    8.044390] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    8.052477] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    8.058442] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    8.065338] pci 0000:01:00.0: PME# supported from D0 D3cold
[    8.074192] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    8.080787] pci 0000:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref]
[    8.088467] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref]
[    8.096538] pci 0000:00:00.0: BAR 8: assigned [mem 0x30000000-0x300fffff]
[    8.103363] pci 0000:01:00.0: BAR 0: assigned [mem 0x30000000-0x30000fff 64bit]
[    8.110755] pci 0000:00:00.0: PCI bridge to [bus 01]
[    8.115772] pci 0000:00:00.0:   bridge window [mem 0x30000000-0x300fffff]
[    8.122703] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    8.128347] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    8.134091] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x9d4 took 11130 usecs
[    8.141710] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    8.146942] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    8.154729] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[    8.163879] pcie_plda 2b000000.pcie: msi#0 address_hi 0x0 address_lo 0x190
[    8.171111] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    8.176291] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    8.183725] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    8.190808] hub 1-0:1.0: USB hub found
[    8.194517] hub 1-0:1.0: 1 port detected
[    8.199526] hub 2-0:1.0: USB hub found
[    8.203235] hub 2-0:1.0: 4 ports detected
[    8.210087] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges:
[    8.217044] pcie_plda 2c000000.pcie:      MEM 0x0038000000..0x003fffffff -> 0x0038000000
[    8.225152] pcie_plda 2c000000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    8.233353] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    8.241109] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000)
[    8.248900] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000)
[    8.515415] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    8.685439] pcie_plda 2c000000.pcie: Port link down, exit.
[    8.704503] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully.
[    8.725891] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully.
[    8.736051] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[    8.746127] printk: console [ttyS0] disabled
[    8.770588] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 17, base_baud = 1500000) is a 16550A
[    8.771779] hub 1-1:1.0: USB hub found
[    8.786961] printk: console [ttyS0] enabled
[    8.787109] hub 1-1:1.0: 4 ports detected
[    8.841961] printk: bootconsole [sbi0] disabled
[    8.954754] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter!
[    8.997053] jh7110-vin 19800000.vin_sysctl: stfcamss probe success!
[    9.040422] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode.
[    9.040799] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode.
[    9.041006] jh7110-sec 16000000.crypto: will run requests pump with realtime priority
[    9.044208] jh7110-sec 16000000.crypto: Initialized
[    9.045266] starfive-i2s 120b0000.i2stx_4ch0:  designware: play supported
[    9.045276] starfive-i2s 120b0000.i2stx_4ch0: designware: i2s master mode supported
[    9.045498] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin
[    9.045508] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 445
[    9.045638] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[    9.045659] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator
[    9.045971] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end
[    9.046172] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000
[    9.046408] cdns-dsi 295d0000.mipi: starfive dsi bind end
[    9.048579] of_cfs_init
[    9.048611] of_cfs_init: OK
[    9.049136] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493
[    9.049643] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.087625] dwmmc_starfive 16010000.sdio0: Using internal DMA controller.
[    9.134781] dwmmc_starfive 16020000.sdio1: Using internal DMA controller.
[    9.185846] dwmmc_starfive 16010000.sdio0: Version ID is 290a
[    9.205734] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.209707] starfive soc:display-subsystem: bound 29400000.dc8200 (ops 0xffffffff80e75b38)
[    9.209725] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin
[    9.210644] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    9.210658] cfg80211: failed to load regulatory.db
[    9.217676] dwmmc_starfive 16020000.sdio1: Version ID is 290a
[    9.261990] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 29,32 bit host data width,32 deep fifo
[    9.311953] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 30,32 bit host data width,32 deep fifo
[    9.352910] mmc_host mmc0: card is non-removable.
[    9.400050] mmc_host mmc1: card is polling.
[    9.438694] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success
[    9.655377] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    9.705367] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    9.710002] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done.
[    9.915366] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd
[    9.928225] innohdmi-starfive 29590000.hdmi: inno hdmi bind end
[    9.965348] dwmmc_starfive 16020000.sdio1: Unexpected interrupt latency
[   10.015350] dwmmc_starfive 16010000.[   39.615932] mipi_0p9: disabling
sdio0: Unexpected interrupt latency
[   10.015350] dwmmc_starfive 16020000.sdio1: Unexpected interrupt latency
[   10.774854] starfive soc:display-subsystem: bound 29590000.hdmi (ops 0xffffffff80e768e8)
[   10.805348] dwmmc_starfive 16020000.sdio1: Unexpected interrupt latency
[   10.805350] dwmmc_starfive 16010000.sdio0: Unexpected interrupt latency
[   10.913923] vs-simple-encoder soc:dsi-output: encoder_bind begin
[   10.953142] no panel, -517
[   10.970793] vs-simple-encoder soc:dsi-output: encoder_bind error
[   11.005350] dwmmc_starfive 16010000.sdio0: Unexpected interrupt latency
[   11.005351] dwmmc_starfive 16020000.sdio1: Unexpected interrupt latency
[   11.096261] starfive soc:display-subsystem: bound soc:dsi-output (ops 0xffffffff80e76530)
[   11.135348] dwmmc_starfive 16020000.sdio1: Unexpected interrupt latency
[   11.135349] dwmmc_starfive 16010000.sdio0: Unexpected interrupt latency
[   11.236594] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 1
[   11.275351] dwmmc_starfive 16010000.sdio0: Unexpected interrupt latency
[   11.285347] dwmmc_starfive 16020000.sdio1: Unexpected interrupt latency
[   11.385332] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 50000000Hz, actual 49500000HZ div = 2)
[   11.407910] random: fast init done
[   11.472565] mmc1: new high speed SDXC card at address 59b4
[   11.484875] input: TK-FCP026 Series as /devices/platform/soc/2b000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:056E:1013.0001/input/input0
[   11.509193] mmcblk1: mmc1:59b4 ED2S5 119 GiB
[   11.607084] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 300000Hz, actual 300000HZ div = 330)
[   11.643201]  mmcblk1: p1 p2 p3 p4
[   11.698744] hid-generic 0003:056E:1013.0001: input: USB HID v1.10 Keyboard [TK-FCP026 Series] on usb-0000:01:00.0-1.1/input0
[   11.800123] input: TK-FCP026 Series System Control as /devices/platform/soc/2b000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:056E:1013.0002/input/input1
[   11.975528] input: TK-FCP026 Series Consumer Control as /devices/platform/soc/2b000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:056E:1013.0002/input/input2
[   12.083963] hid-generic 0003:056E:1013.0002: input: USB HID v1.10 Device [TK-FCP026 Series] on usb-0000:01:00.0-1.1/input1
[   12.156179] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000Hz, actual 200000HZ div = 495)
[   12.665475] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 100000Hz, actual 100000HZ div = 990)
[   13.455437] ALSA device list:
[   13.474832]   #0: Starfive-PWMDAC-Sound-Card
[   13.502734]   #1: Starfive-HDMI-Sound-Card
[   13.535069] Freeing unused kernel image (initmem) memory: 2188K
[   13.541318] Run /init as init process
[   13.545009]   with arguments:
[   13.548031]     /init
[   13.550321]     earlyprintk
[   13.553134]   with environment:
[   13.556329]     HOME=/
[   13.558710]     TERM=linux
[   13.680223] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   14.245147] EXT4-fs (mmcblk1p4): re-mounted. Opts: (null). Quota mode: disabled.
[   14.693107] udevd[219]: starting version 3.2.10
[   14.709634] random: udevd: uninitialized urandom read (16 bytes read)
[   14.717375] random: udevd: uninitialized urandom read (16 bytes read)
[   14.723891] random: udevd: uninitialized urandom read (16 bytes read)
[   14.751454] udevd[220]: starting eudev-3.2.10
[   14.859939] vdec: loading out-of-tree module taints kernel.
[   14.867226] cnm_jpu 13090000.jpu: init device.
[   14.872177] SUCCESS alloc_chrdev_region
[   14.873268] vdec 130a0000.vpu_dec: device init.
[   14.880649] SUCCESS alloc_chrdev_region
[   15.436748] starfive-eth-plat 16030000.ethernet eth0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[   15.448463] starfive-eth-plat 16030000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   16.336734] dwmac4: Master AXI performs fixed burst length
[   16.342309] starfive-eth-plat 16030000.ethernet eth0: No Safety Features support found
[   16.350389] starfive-eth-plat 16030000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   16.362590] starfive-eth-plat 16030000.ethernet eth0: configuring for phy/rgmii-id link mode
[   16.374365] starfive-eth-plat 16040000.ethernet eth1: PHY [stmmac-1:00] driver [YT8512B Ethernet] (irq=POLL)
[   16.384428] starfive-eth-plat 16040000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   16.392709] dwmac4: Master AXI performs fixed burst length
[   16.398214] starfive-eth-plat 16040000.ethernet eth1: No Safety Features support found
[   16.406156] starfive-eth-plat 16040000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   16.416683] starfive-eth-plat 16040000.ethernet eth1: configuring for phy/rgmii-id link mode
[   18.497448] starfive-eth-plat 16040000.ethernet eth1: Link is Up - 100Mbps/Full - flow control off
[   39.615932] mipi_0p9: disabling
#

root@starfive:~# uname -a
Linux starfive 5.15.0-starfive #1 SMP Mon Dec 19 07:56:37 EST 2022 riscv64 GNU/Linux
root@starfive:~#
root@starfive:~# dmesg
[    0.000000] Linux version 5.15.0-starfive (sw_buildbot@mdcsw02) (riscv64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP Mon Dec 19 07:56:37 EST 2022
[    0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[    0.000000] Machine model: StarFive VisionFive V2
[    0.000000] earlycon: uart0 at MMIO32 0x0000000010000000 (options '115200')
[    0.000000] printk: bootconsole [uart0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000c010ffff]
[    0.000000]   node   0: [mem 0x00000000c0110000-0x00000000c01fffff]
[    0.000000]   node   0: [mem 0x00000000c0200000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000013fffffff]
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10000
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI v0.2 HSM extension detected
[    0.000000] CPU with hartid=0 is not available
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv: ISA extensions acdfim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] percpu: Embedded 17 pages/cpu s31528 r8192 d29912 u69632
[    0.000000] pcpu-alloc: s31528 r8192 d29912 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1033735
[    0.000000] Kernel command line: root=/dev/mmcblk1p3 rw console=tty0 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0
[    0.000000] Unknown command line parameters: stmmaceth=chain_mode:1 selinux=0
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3451368K/4192256K available (9884K kernel code, 4982K rwdata, 4096K rodata, 2191K init, 401K bss, 216600K reserved, 524288K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu:     RCU debug extended QS entry/exit.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts.
[    0.000000] random: get_random_bytes called from start_kernel+0x4d0/0x6e2 with crng_init=0
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns
[    0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns
[    0.009003] clocksource: timer@13050000.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.020327] clocksource: timer@13050000.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.031659] clocksource: timer@13050000.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.042985] clocksource: timer@13050000.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.054473] Console: colour dummy device 80x25
[    0.060660] printk: console [tty0] enabled
[    0.065214] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000)
[    0.076437] pid_max: default: 32768 minimum: 301
[    0.081664] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.089901] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.099981] ASID allocator disabled
[    0.103919] rcu: Hierarchical SRCU implementation.
[    0.109372] EFI services will not be available.
[    0.114755] smp: Bringing up secondary CPUs ...
[    0.121388] smp: Brought up 1 node, 4 CPUs
[    0.127085] devtmpfs: initialized
[    0.138281] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.149143] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.170414] pinctrl core: initialized pinctrl subsystem
[    0.177070] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.184291] cpuidle: using governor menu
[    0.210593] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200
[    0.219775] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output
[    0.228616] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200
[    0.249118] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.256502] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.267098] vgaarb: loaded
[    0.270324] SCSI subsystem initialized
[    0.274695] libata version 3.00 loaded.
[    0.274873] usbcore: registered new interface driver usbfs
[    0.280947] usbcore: registered new interface driver hub
[    0.286840] usbcore: registered new device driver usb
[    0.292683] mc: Linux media interface: v0.10
[    0.297433] videodev: Linux video capture interface: v2.00
[    0.303659] Advanced Linux Sound Architecture Driver Initialized.
[    0.310754] Bluetooth: Core ver 2.22
[    0.314717] NET: Registered PF_BLUETOOTH protocol family
[    0.320574] Bluetooth: HCI device and connection manager initialized
[    0.327572] Bluetooth: HCI socket layer initialized
[    0.332954] Bluetooth: L2CAP socket layer initialized
[    0.338526] Bluetooth: SCO socket layer initialized
[    0.344230] clocksource: Switched to clocksource riscv_clocksource
[    0.358649] NET: Registered PF_INET protocol family
[    0.364690] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.376739] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear)
[    0.386266] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.395413] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.404830] TCP: Hash tables configured (established 32768 bind 32768)
[    0.412290] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.420066] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
[    0.428465] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.435400] RPC: Registered named UNIX socket transport module.
[    0.441924] RPC: Registered udp transport module.
[    0.447117] RPC: Registered tcp transport module.
[    0.452291] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.460105] PCI: CLS 0 bytes, default 64
[    0.465110] Initialise system trusted keyrings
[    0.470246] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    0.474489] Unpacking initramfs...
[    0.483186] NFS: Registering the id_resolver key type
[    0.488817] Key type id_resolver registered
[    0.493433] Key type id_legacy registered
[    0.497973] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.505391] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.513607] ntfs: driver 2.1.32 [Flags: R/W].
[    0.518714] jffs2: version 2.2. (NAND) c 2001-2006 Red Hat, Inc.
[    0.525920] fuse: init (API version 7.34)
[    0.570101] NET: Registered PF_ALG protocol family
[    0.575431] Key type asymmetric registered
[    0.579954] Asymmetric key parser 'x509' registered
[    0.585458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.593617] io scheduler mq-deadline registered
[    0.598639] io scheduler kyber registered
[    0.607893] start plist test
[    0.612237] end plist test
[    0.708128] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully.
[    0.719385] L2CACHE: DataError @ 0x00000000.08040140
[    0.724958] L2CACHE: DataFail @ 0x00000000.0804005B
[    0.730422] L2CACHE: No. of Banks in the cache: 8
[    0.735634] L2CACHE: No. of ways per bank: 16
[    0.740443] L2CACHE: Sets per bank: 256
[    0.744693] L2CACHE: Bytes per cache block: 64
[    0.749599] L2CACHE: Index of the largest way enabled: 15
[    0.755895] jh7110-pmu 17030000.power-controller: registered 8 power domains
[    0.823058] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.833017] @@#########################@@
[    0.875351] @@ dev ptr:ffffffe0bfee0000/1500/1
[    0.880510] PVR_K:  1: Read BVNC 36.50.54.182 from HW device registers
[    0.887810] PVR_K:  1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system
[    0.898025] [drm] Initialized pvr 1.17.6210866 20170530 for 18000000.gpu on minor 0
[    0.920407] loop: module loaded
[    0.926442] spi-nor spi0.0: gd25lq128d (16384 Kbytes)
[    1.179648] Freeing initrd memory: 9456K
[    1.200532] 3 fixed-partitions partitions found on MTD device 13010000.spi.0
[    1.208365] Creating 3 MTD partitions on "13010000.spi.0":
[    1.214440] 0x000000000000-0x000000020000 : "spl"
[    1.221389] 0x000000100000-0x000000400000 : "uboot"
[    1.228325] 0x000000f00000-0x000001000000 : "data"
[    1.236236] libphy: Fixed MDIO Bus: probed
[    1.242212] CAN device driver interface
[    1.247071] starfive-eth-plat 16030000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    1.258489] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    1.266772] starfive-eth-plat 16030000.ethernet:     DWMAC4/5
[    1.272823] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported
[    1.281466] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported
[    1.290110] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported
[    1.297598] starfive-eth-plat 16030000.ethernet: TSO supported
[    1.304029] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.313255] starfive-eth-plat 16030000.ethernet: Enabled Flow TC (entries=1)
[    1.321032] starfive-eth-plat 16030000.ethernet: TSO feature enabled
[    1.328044] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width
[    1.587153] libphy: stmmac: probed
[    1.590928] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    1.601889] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    1.614036] starfive-eth-plat 16040000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    1.625459] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    1.633716] starfive-eth-plat 16040000.ethernet:     DWMAC4/5
[    1.639785] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported
[    1.648429] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported
[    1.657077] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported
[    1.664566] starfive-eth-plat 16040000.ethernet: TSO supported
[    1.670997] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.680243] starfive-eth-plat 16040000.ethernet: Enabled Flow TC (entries=1)
[    1.688023] starfive-eth-plat 16040000.ethernet: TSO feature enabled
[    1.695036] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width
[    1.953570] libphy: stmmac: probed
[    1.957379] YT8512B Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[    1.967672] YT8512B Ethernet stmmac-1:03: attached PHY driver (mii_bus:phy_addr=stmmac-1:03, irq=POLL)
[    1.979497] Intel(R) Wireless WiFi driver for Linux
[    1.986870] cdns3-starfive 10210000.usbdrd: usb mode 2 2.0 probe success
[    1.995071] usbcore: registered new interface driver uas
[    2.000982] usbcore: registered new interface driver usb-storage
[    2.024572] starfive-rtc 17040000.rtc: registered as rtc0
[    2.030540] starfive-rtc 17040000.rtc: setting system clock to 2001-01-01T00:00:00 UTC (978307200)
[    2.040588] i2c_dev: i2c /dev entries driver
[    2.045561] usbcore: registered new interface driver uvcvideo
[    2.053083] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500)
[    2.062844] Bluetooth: HCI UART driver ver 2.3
[    2.067773] Bluetooth: HCI UART protocol H4 registered
[    2.073649] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to get regulator for cpu!
[    2.082794] starfive-cpufreq soc:starfive,jh7110-cpufreq: Failed to init starfive cpu dvfs info
[    2.092931] sdhci: Secure Digital Host Controller Interface driver
[    2.099773] sdhci: Copyright(c) Pierre Ossman
[    2.104616] Synopsys Designware Multimedia Card Interface Driver
[    2.111541] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.118599] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel
[    2.127746] jh7110-sec 16000000.crypto: Cannot initial dma chan
[    2.134578] usbcore: registered new interface driver usbhid
[    2.140729] usbhid: USB HID core driver
[    2.145228] usbcore: registered new interface driver snd-usb-audio
[    2.155381] NET: Registered PF_PACKET protocol family
[    2.160973] can: controller area network core
[    2.165896] NET: Registered PF_CAN protocol family
[    2.171188] can: raw protocol
[    2.174482] can: broadcast manager protocol
[    2.179102] can: netlink gateway - max_hops=1
[    2.184206] Bluetooth: RFCOMM TTY layer initialized
[    2.189630] Bluetooth: RFCOMM socket layer initialized
[    2.195334] Bluetooth: RFCOMM ver 1.11
[    2.199501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.205384] Bluetooth: BNEP filters: protocol multicast
[    2.211156] Bluetooth: BNEP socket layer initialized
[    2.216823] 9pnet: Installing 9P2000 support
[    2.221591] Key type dns_resolver registered
[    2.227079] Loading compiled-in X.509 certificates
[    2.268404] starfive_jh7110-pinctrl 13040000.gpio: SiFive GPIO chip registered 64 GPIOs
[    2.278023] starfive_jh7110-pinctrl 17020000.gpio: SiFive GPIO chip registered 4 GPIOs
[    2.287007] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels
[    2.294910] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels
[    2.304443] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present!
[    2.313591] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 23
[    2.321646] ssp-pl022 10060000.spi: ARM PL022 driver for StarFive SoC platform, device ID: 0x00041022
[    2.331852] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to (____ptrval____)
[    2.341992] ssp-pl022 10060000.spi: Requested frequency: 10000000 Hz is unsupported,select by default 8250000 Hz
[    2.353615] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms
[    2.363534] i2c 2-0045: Fixing up cyclic dependency with 295d0000.mipi
[    2.371039] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00
[    2.378361] i2c 2-0019: Fixing up cyclic dependency with 295d0000.mipi
[    2.386999] at24 5-0050: supply vcc not found, using dummy regulator
[    2.394835] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    2.404119] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV
[    2.414308] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV
[    2.424634] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV
[    2.434826] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV
[    2.444277] i2c 6-0010: Fixing up cyclic dependency with 19800000.vin_sysctl
[    2.452449] imx219 6-0010: supply VANA not found, using dummy regulator
[    2.459885] imx219 6-0010: supply VDIG not found, using dummy regulator
[    2.467256] imx219 6-0010: supply VDDL not found, using dummy regulator
[    2.482051] imx219 6-0010: failed to read chip id 219
[    2.487856] imx219: probe of 6-0010 failed with error -5
[    2.496313] pcie_plda 2b000000.pcie: host bridge /soc/pcie@2B000000 ranges:
[    2.504042] pcie_plda 2b000000.pcie:      MEM 0x0030000000..0x0037ffffff -> 0x0030000000
[    2.513013] pcie_plda 2b000000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    2.521995] ATR entry: 0x0940000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    2.530569] ATR entry: 0x0030000000 -> 0x0030000000 [0x0008000000] (param: 0x000000)
[    2.539134] ATR entry: 0x0900000000 -> 0x0900000000 [0x0040000000] (param: 0x000000)
[    2.894332] pcie_plda 2b000000.pcie: Port link up.
[    2.899776] pcie_plda 2b000000.pcie: PCI host bridge to bus 0000:00
[    2.906716] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.912768] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    2.920368] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
[    2.928661] pci 0000:00:00.0: [1556:1111] type 01 class 0x060400
[    2.935307] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref]
[    2.943331] pci 0000:00:00.0: supports D1 D2
[    2.948053] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.958884] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.967871] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    2.974526] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    2.982089] pci 0000:01:00.0: PME# supported from D0 D3cold
[    2.991592] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.998930] pci 0000:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref]
[    3.007400] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref]
[    3.016255] pci 0000:00:00.0: BAR 8: assigned [mem 0x30000000-0x300fffff]
[    3.023738] pci 0000:01:00.0: BAR 0: assigned [mem 0x30000000-0x30000fff 64bit]
[    3.031831] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.037315] pci 0000:00:00.0:   bridge window [mem 0x30000000-0x300fffff]
[    3.044914] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    3.051155] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    3.057436] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x9d4 took 12238 usecs
[    3.065829] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.071616] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    3.080195] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[    3.090355] pcie_plda 2b000000.pcie: msi#0 address_hi 0x0 address_lo 0x190
[    3.098325] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.104102] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    3.112292] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    3.119955] hub 1-0:1.0: USB hub found
[    3.124129] hub 1-0:1.0: 1 port detected
[    3.129524] hub 2-0:1.0: USB hub found
[    3.133699] hub 2-0:1.0: 4 ports detected
[    3.140954] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges:
[    3.148707] pcie_plda 2c000000.pcie:      MEM 0x0038000000..0x003fffffff -> 0x0038000000
[    3.157662] pcie_plda 2c000000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    3.166655] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    3.175220] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000)
[    3.183768] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000)
[    3.344283] usb usb2-port2: over-current condition
[    3.444304] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.504310] usb usb2-port4: over-current condition
[    3.614508] pcie_plda 2c000000.pcie: Port link down, exit.
[    3.634337] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully.
[    3.655436] hub 1-1:1.0: USB hub found
[    3.656824] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully.
[    3.659813] hub 1-1:1.0: 4 ports detected
[    3.670789] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[    3.685594] printk: console [ttyS0] disabled
[    3.710553] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 17, base_baud = 1500000) is a 16550A
[    3.720407] printk: console [ttyS0] enabled
[    3.729214] printk: bootconsole [uart0] disabled
[    3.739447] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter!
[    3.747568] jh7110-vin 19800000.vin_sysctl: stfcamss probe success!
[    3.756345] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode.
[    3.756951] jh7110-sec 16000000.crypto: will run requests pump with realtime priority
[    3.763667] dwmmc_starfive 16010000.sdio0: Using internal DMA controller.
[    3.772173] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode.
[    3.778325] dwmmc_starfive 16010000.sdio0: Version ID is 290a
[    3.778369] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 29,32 bit host data width,32 deep fifo
[    3.781261] jh7110-sec 16000000.crypto: Initialized
[    3.782357] starfive-i2s 120b0000.i2stx_4ch0:  designware: play supported
[    3.782367] starfive-i2s 120b0000.i2stx_4ch0: designware: i2s master mode supported
[    3.782549] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin
[    3.782560] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 445
[    3.782696] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[    3.782722] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator
[    3.783012] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end
[    3.783213] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000
[    3.783455] cdns-dsi 295d0000.mipi: starfive dsi bind end
[    3.785637] dwmmc_starfive 16020000.sdio1: Using internal DMA controller.
[    3.785709] of_cfs_init
[    3.785744] of_cfs_init: OK
[    3.786268] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493
[    3.786774] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.791504] mmc_host mmc0: card is non-removable.
[    3.801153] dwmmc_starfive 16020000.sdio1: Version ID is 290a
[    3.906458] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 30,32 bit host data width,32 deep fifo
[    3.907275] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.916211] mmc_host mmc1: card is polling.
[    3.925079] starfive soc:display-subsystem: bound 29400000.dc8200 (ops 0xffffffff80e75af8)
[    3.935166] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin
[    3.941612] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.950277] cfg80211: failed to load regulatory.db
[    3.955907] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success
[    3.966014] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done.
[    3.972564] innohdmi-starfive 29590000.hdmi: inno hdmi bind end
[    3.978505] starfive soc:display-subsystem: bound 29590000.hdmi (ops 0xffffffff80e768a8)
[    3.986612] vs-simple-encoder soc:dsi-output: encoder_bind begin
[    3.992642] no panel, -517
[    3.995365] vs-simple-encoder soc:dsi-output: encoder_bind error
[    4.001374] starfive soc:display-subsystem: bound soc:dsi-output (ops 0xffffffff80e764f0)
[    4.010000] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 1
[    4.034249] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    4.144348] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    4.396890] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 50000000Hz, actual 49500000HZ div = 2)
[    4.406993] mmc1: new high speed SDXC card at address 59b4
[    4.413023] random: fast init done
[    4.417358] mmcblk1: mmc1:59b4 EC1S5 59.7 GiB
[    4.430503]  mmcblk1: p1 p2 p3
[    4.484331] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 300000Hz, actual 300000HZ div = 330)
[    4.924339] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000Hz, actual 200000HZ div = 495)
[    5.094347] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd
[    5.243954] input: TK-FCP026 Series as /devices/platform/soc/2b000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:056E:1013.0001/input/input0
[    5.324734] hid-generic 0003:056E:1013.0001: input: USB HID v1.10 Keyboard [TK-FCP026 Series] on usb-0000:01:00.0-1.1/input0
[    5.343747] input: TK-FCP026 Series System Control as /devices/platform/soc/2b000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:056E:1013.0002/input/input1
[    5.374246] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 100000Hz, actual 100000HZ div = 990)
[    5.424563] input: TK-FCP026 Series Consumer Control as /devices/platform/soc/2b000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:056E:1013.0002/input/input2
[    5.441441] hid-generic 0003:056E:1013.0002: input: USB HID v1.10 Device [TK-FCP026 Series] on usb-0000:01:00.0-1.1/input1
[    6.084315] ALSA device list:
[    6.087335]   #0: Starfive-PWMDAC-Sound-Card
[    6.091659]   #1: Starfive-HDMI-Sound-Card
[    6.100590] Freeing unused kernel image (initmem) memory: 2188K
[    6.106909] Run /init as init process
[    6.110626]   with arguments:
[    6.110642]     /init
[    6.110655]   with environment:
[    6.110670]     HOME=/
[    6.110683]     TERM=linux
[    6.110697]     stmmaceth=chain_mode:1
[    6.110716]     selinux=0
[    7.089399] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    7.776963] systemd[1]: System time before build time, advancing clock.
[    7.863097] systemd[1]: systemd 251.2-5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    7.895329] systemd[1]: Detected architecture riscv64.
[    7.903523] systemd[1]: Hostname set to <starfive>.
[    8.433281] systemd[1]: Queued start job for default target Graphical Interface.
[    8.442977] systemd[1]: Created slice Slice /system/getty.
[    8.449336] systemd[1]: Created slice Slice /system/modprobe.
[    8.456514] systemd[1]: Created slice Slice /system/serial-getty.
[    8.463971] systemd[1]: Created slice Slice /system/systemd-fsck.
[    8.471207] systemd[1]: Created slice User and Session Slice.
[    8.478157] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.487122] systemd[1]: Arbitrary Executable File Formats File System Automount Point was skipped because of a failed condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[    8.504660] systemd[1]: Reached target Local Integrity Protected Volumes.
[    8.512702] systemd[1]: Reached target Remote File Systems.
[    8.519576] systemd[1]: Reached target Slice Units.
[    8.525850] systemd[1]: Reached target Swaps.
[    8.531613] systemd[1]: Reached target Local Verity Protected Volumes.
[    8.539820] systemd[1]: Listening on Syslog Socket.
[    8.545907] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.553896] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.567859] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[    8.579756] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.587021] systemd[1]: Listening on Journal Socket.
[    8.593386] systemd[1]: Listening on udev Control Socket.
[    8.599998] systemd[1]: Listening on udev Kernel Socket.
[    8.608392] systemd[1]: Mounting Huge Pages File System...
[    8.616435] systemd[1]: Mounting POSIX Message Queue File System...
[    8.625546] systemd[1]: Mounting Kernel Debug File System...
[    8.632460] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[    8.646608] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/5.15.0-starfive/modules.devname).
[    8.665578] systemd[1]: Starting Load Kernel Module configfs...
[    8.674147] systemd[1]: Starting Load Kernel Module drm...
[    8.682437] systemd[1]: Starting Load Kernel Module fuse...
[    8.688911] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    8.705889] systemd[1]: Starting Journal Service...
[    8.716917] systemd[1]: Starting Load Kernel Modules...
[    8.725627] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.732846] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    8.745743] systemd[1]: Starting Coldplug All udev Devices...
[    8.748138] EXT4-fs (mmcblk1p3): re-mounted. Opts: errors=remount-ro. Quota mode: disabled.
[    8.766284] systemd[1]: Mounted Huge Pages File System.
[    8.772985] systemd[1]: Mounted POSIX Message Queue File System.
[    8.780431] systemd[1]: Mounted Kernel Debug File System.
[    8.787459] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    8.795202] systemd[1]: Finished Load Kernel Module configfs.
[    8.809276] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    8.817365] systemd[1]: Finished Load Kernel Module drm.
[    8.823873] systemd[1]: Started Journal Service.
[    8.866146] systemd-journald[253]: Received client request to flush runtime journal.
[    9.719973] vdec: loading out-of-tree module taints kernel.
[    9.728380] SUCCESS alloc_chrdev_region
[    9.729208] vdec 130a0000.vpu_dec: device init.
[    9.733434] cnm_jpu 13090000.jpu: init device.
[    9.738362] SUCCESS alloc_chrdev_region
[   10.324629] random: alsactl: uninitialized urandom read (4 bytes read)
[   10.950993] random: alsactl: uninitialized urandom read (4 bytes read)
[   11.384365] random: alsactl: uninitialized urandom read (4 bytes read)
[   11.389792] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[   11.422177] random: avahi-daemon: uninitialized urandom read (4 bytes read)
[   12.224275] random: crng init done
[   12.227703] random: 2 urandom warning(s) missed due to ratelimiting
[   13.320969] starfive-eth-plat 16030000.ethernet eth0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[   13.332100] starfive-eth-plat 16030000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   13.344307] dwmac4: Master AXI performs fixed burst length
[   13.349871] starfive-eth-plat 16030000.ethernet eth0: No Safety Features support found
[   13.357899] starfive-eth-plat 16030000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   13.367295] starfive-eth-plat 16030000.ethernet eth0: configuring for phy/rgmii-id link mode
[   13.388888] starfive-eth-plat 16040000.ethernet eth1: PHY [stmmac-1:00] driver [YT8512B Ethernet] (irq=POLL)
[   13.399026] starfive-eth-plat 16040000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   13.407375] dwmac4: Master AXI performs fixed burst length
[   13.412921] starfive-eth-plat 16040000.ethernet eth1: No Safety Features support found
[   13.420942] starfive-eth-plat 16040000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   13.456848] starfive-eth-plat 16040000.ethernet eth1: configuring for phy/rgmii-id link mode
[   13.468492] starfive-eth-plat 16040000.ethernet eth1: Link is Up - 100Mbps/Full - flow control off
[   13.501237] vs_gem_dumb_create size = 1000
[   13.505400] Allocated coherent memory, vaddr: 0xFFFFFFE0FEBFD2D8, paddr: 0x1012E5000
[   13.513153] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   13.943569] PVR_K:  412: RGX Firmware image 'rgx.fw.36.50.54.182' loaded
[   14.011651] PVR_K:  412: Shader binary image 'rgx.sh.36.50.54.182' loaded
[   14.022915] PVR_K:  412: X connected - (devID = 0)
[   14.251106] vs_gem_dumb_create size = 7e9000
[   14.256407] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFC20C0, paddr: 0x80200000
[   14.264086] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   14.306311] vs_gem_dumb_create size = 4000
[   14.310549] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFBEA80, paddr: 0x80108000
[   14.318227] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   14.323980] vs_gem_dumb_create size = 4000
[   14.328255] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFBEB60, paddr: 0x8010C000
[   14.335931] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   15.320413] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate rate 148500000 tmdsclk 148500000
[   15.429986] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pixclock = 148500000
[   15.439744] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmdsclock = 148500000
[   15.449581] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->prediv = 1
[   15.458467] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->fbdiv = 99
[   15.467348] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmds_div_a = 1
[   15.476575] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmds_div_b = 1
[   15.485803] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->tmds_div_c = 1
[   15.495032] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_a = 1
[   15.504259] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_b = 2
[   15.513475] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_c = 2
[   15.522709] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pclk_div_d = 2
[   15.531967] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->vco_div_5_en = 0
[   15.541378] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->fracdiv = 0
[   15.550352] innohdmi-starfive 29590000.hdmi: *******************************************************
[   15.559492] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->tmdsclock = 148500000
[   15.569414] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->prediv = 1
[   15.578387] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->fbdiv = 20
[   15.587363] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->postdiv = 1
[   15.596424] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->post_div_en = 3
[   15.605833] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->post_cfg->version = 3
[   34.484816] mipi_0p9: disabling
[   39.704348] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[   39.855298] input: KYE ADNS6000 Optical Mouse as /devices/platform/soc/2b000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0458:005E.0003/input/input3
[   39.871618] hid-generic 0003:0458:005E.0003: input: USB HID v1.10 Mouse [KYE ADNS6000 Optical Mouse] on usb-0000:01:00.0-1.3/input0
[   41.418339] systemd-journald[253]: Oldest entry in /var/log/journal/bd887d4196a5463aa4c948eb57286362/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[   41.436358] systemd-journald[253]: /var/log/journal/bd887d4196a5463aa4c948eb57286362/system.journal: Journal header limits reached or header out-of-date, rotating.
[   68.635238] PVR_K:(Error):   412: DevmemSubAllocate: Failed! Error is PVRSRV_ERROR_DEVICEMEM_OUT_OF_DEVICE_VM. Allocation size: 0x0000000058 [1635]
[   68.648499] PVR_K:(Error):   412: RGXCreateHWRTDataSet: DevmemAllocate for FwHWRTDataCommon failed [1582]
[   68.658091] Unable to handle kernel paging request at virtual address ffffff8d60a00018
[   68.666024] Oops [#1]
[   68.668296] Modules linked in: jpu(O) venc(O) vdec(O)
[   68.673358] CPU: 1 PID: 412 Comm: X Tainted: G          `O      5.15.0-starfive #1
[   68.680928] Hardware name: StarFive VisionFive V2 (DT)
[   68.686064] epc : RGXDestroyHWRTDataSet+0x24/0xca
[   68.690776]  ra : PVRSRVBridgeRGXCreateHWRTDataSet+0x2ba/0xae8
[   68.696618] epc : ffffffff804b29da ra : ffffffff804e6ff6 sp : ffffffd0044eb920
[   68.703844]  gp : ffffffff815006b8 tp : ffffffe0c0f2bc00 t0 : 0000000000000040
[   68.711069]  t1 : 0000000000000000 t2 : 0000000000000000 s0 : ffffffd0044eb960
[   68.718294]  s1 : ffffffe0c49f8258 a0 : 0200000d60a00000 a1 : 000000000000009b
[   68.725520]  a2 : 0000000000000053 a3 : 0000000000000053 a4 : 0000000000000053
[   68.732745]  a5 : 68fdd6bf06041900 a6 : ffffffe0c89816d0 a7 : ffffffe0c89816f8
[   68.739971]  s2 : 0200000d60a00000 s3 : ffffffff815020a8 s4 : ffffffe0c49f8240
[   68.747197]  s5 : ffffffe0c49f8098 s6 : ffffffe0c49f80b8 s7 : 00000000000001c0
[   68.754422]  s8 : ffffffe0c49f8198 s9 : 0000000000000000 s10: ffffffe0c49fa000
[   68.761647]  s11: ffffffe0c49f8000 t3 : 0000000000000002 t4 : 0000000000000402
[   68.768871]  t5 : ffffffe0c6c1c200 t6 : ffffffe0c6c1c220
[   68.774180] status: 0000000200000120 badaddr: ffffff8d60a00018 cause: 000000000000000d
[   68.782102] [<ffffffff804b29da>] RGXDestroyHWRTDataSet+0x24/0xca
[   68.788107] [<ffffffff804e6ff6>] PVRSRVBridgeRGXCreateHWRTDataSet+0x2ba/0xae8
[   68.795238] [<ffffffff80482170>] BridgedDispatchKM+0x150/0x46a
[   68.801075] [<ffffffff8045fdbe>] PVRSRV_BridgeDispatchKM+0xb6/0x182
[   68.807345] [<ffffffff804216a4>] drm_ioctl_kernel+0x8c/0xd0
[   68.812921] [<ffffffff804219fe>] drm_ioctl+0x1c2/0x2f2
[   68.818060] [<ffffffff801372a4>] sys_ioctl+0x350/0x818
[   68.823200] [<ffffffff80003046>] ret_from_syscall+0x0/0x2
[   68.828619] ---[ end trace e8d874a9fd9d1c61 ]---
[   69.098425] PVR_K:  412: X disconnected - (devID = 0)
[   69.131289] vs_gem_dumb_create size = 1000
[   69.135428] Allocated coherent memory, vaddr: 0xFFFFFFE0FEC791D0, paddr: 0x10364E000
[   69.143166] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   69.192685] PVR_K:  742: X connected - (devID = 0)
[   69.205996] PVR_K:(Error):   742: DevmemSubAllocate: Failed! Error is PVRSRV_ERROR_DEVICEMEM_OUT_OF_DEVICE_VM. Allocation size: 0x0000010000 [1635]
[   69.219512] PVR_K:(Error):   742: DevmemSubAllocate: Failed! Error is PVRSRV_ERROR_DEVICEMEM_OUT_OF_DEVICE_VM. Allocation size: 0x0000008000 [1635]
[   69.233339] PVR_K:(Error):   742: DevmemSubAllocate: Failed! Error is PVRSRV_ERROR_DEVICEMEM_OUT_OF_DEVICE_VM. Allocation size: 0x0000008000 [1635]
[   69.309600] vs_gem_dumb_create size = 7e9000
[   69.314774] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFDE0C0, paddr: 0x80A00000
[   69.322434] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   69.368664] vs_gem_dumb_create size = 4000
[   69.373169] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFBEA80, paddr: 0x80108000
[   69.380848] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   69.386629] vs_gem_dumb_create size = 4000
[   69.391111] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFBEB60, paddr: 0x8010C000
[   69.398788] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   86.412915] vs_gem_dumb_create size = 7e9000
[   86.417576] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFC20C0, paddr: 0x80200000
[   86.425261] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
[   86.632491] vs_gem_dumb_create size = 7e9000
[   86.637352] Allocated coherent memory, vaddr: 0xFFFFFFE0FCFFA0C0, paddr: 0x81200000
[   86.645034] ====> vs_gem_alloc_buf, 162.vs_obj->get_pages = 0
root@starfive:~#

# ls -l /dev/mtd*
crw-------    1 root     root       90,   0 Jan  1 00:00 /dev/mtd0
crw-------    1 root     root       90,   1 Jan  1 00:00 /dev/mtd0ro
crw-------    1 root     root       90,   2 Jan  1 00:00 /dev/mtd1
crw-------    1 root     root       90,   3 Jan  1 00:00 /dev/mtd1ro
crw-------    1 root     root       90,   4 Jan  1 00:00 /dev/mtd2
crw-------    1 root     root      `90,   5 Jan  1 00:00 /dev/mtd2ro
brw-rw----    1 root     disk       31,   0 Jan  1 00:00 /dev/mtdblock0
brw-rw----    1 root     disk       31,   1 Jan  1 00:00 /dev/mtdblock1
brw-rw----    1 root     disk       31,   2 Jan  1 00:00 /dev/mtdblock2
# ls -l /proc/mtd*
-r--r--r--    1 root     root          `  0 Jan  1 00:09 /proc/mtd
#

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00020000 00001000 "spl"
mtd1: 00300000 00001000 "uboot"
mtd2: 00100000 00001000 "data"
# flashcp -v u-boot-spl.bin.normal.out /dev/mtd0
Erasing blocks: 32/32 (100%)
Writing data: 124k/124k (100%)
Verifying data: 124k/124k (100%)
# flashcp -v visionfive2_fw_payload.img /dev/mtd1
Erasing blocks: 682/682 (100%)
Writing data: 2727k/2727k (100%)
Verifying data: 2727k/2727k (100%)
#

root@starfive:~# fdisk -l /dev/nvme0n1
Disk /dev/nvme0n1: 465.76 GiB, 500107862016 bytes, 976773168 sectors
Disk model: Samsung SSD 970 EVO 500GB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 99EF5891-2C9A-4C91-8A1C-6C1E833E08C4

Device             Start       End   Sectors   Size Type
/dev/nvme0n1p1        34     32767     32734    16M Microsoft reserved
/dev/nvme0n1p2     32768 614432767 614400000   293G Microsoft basic data
/dev/nvme0n1p3 614432768 976771071 362338304 172.8G unknown
root@starfive:~#

orangepi@orangepi5:~$ ls -ld /usr/share/orangepi*
drwxr-xr-x 2 root root 4096 Dec 22 19:36 /usr/share/orangepi
drwxrwxr-x 2 root root 4096 Dec 12 17:58 /usr/share/orangepi5
orangepi@orangepi5:~$ ls -l /usr/share/orangepi
total 4
-rw-r--r-- 1 root root 3269 Dec 22 19:34 boot.cmd
orangepi@orangepi5:~$ ls -l /usr/share/orangepi5/
total 16384
-rw-rw-r-- 1 root root 16777216 Dec 12 17:58 rkspi_loader_sata.img
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo dd if=/usr/share/orangepi5/rkspi_loader_sata.img of=/dev/mtdblock0
[sudo] password for orangepi:
32768+0 records in
32768+0 records out
16777216 bytes (17 MB, 16 MiB) copied, 244.953 s, 68.5 kB/s
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo dd bs=1M if=/dev/zero of=/dev/sda count=2000 status=progress
1754267648 bytes (1.8 GB, 1.6 GiB) copied, 2 s, 877 MB/s
2000+0 records in
2000+0 records out
2097152000 bytes (2.1 GB, 2.0 GiB) copied, 5.5852 s, 375 MB/s
orangepi@orangepi5:~$
orangepi@orangepi5:~$ sudo fdisk -l /dev/sda
Disk /dev/sda: 476.94 GiB, 512110190592 bytes, 1000215216 sectors
Disk model: WT M.2 512G
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo dd if=Orangepi5_1.0.8_ubuntu_jammy_desktop_xfce_linux5.10.110.img of=/dev/sda bs=1M status=progress
8129609728 bytes (8.1 GB, 7.6 GiB) copied, 119 s, 68.3 MB/s
7800+0 records in
7800+0 records out
8178892800 bytes (8.2 GB, 7.6 GiB) copied, 121.861 s, 67.1 MB/s
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo sync
orangepi@orangepi5:~$ sudo fdisk -l /dev/sda
GPT PMBR size mismatch (15974399 != 1000215215) will be corrected by write.
The backup GPT table is not on the end of the device.
Disk /dev/sda: 476.94 GiB, 512110190592 bytes, 1000215216 sectors
Disk model: WT M.2 512G
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 58FCCC02-859A-5041-ADA7-14802AADF341

Device      Start      End  Sectors  Size Type
/dev/sda1   61440   585727   524288  256M Linux extended boot
/dev/sda2  585728 15974366 15388639  7.3G Linux filesystem
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo mount /dev/sda1 /mnt
orangepi@orangepi5:~$ df -h /mnt
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda1       256M   95M  162M  37% /mnt
orangepi@orangepi5:~$ ls -l /mnt
total 96104
-rwxr-xr-x 1 root root   230456 Dec 22 19:39 boot.bmp
-rwxr-xr-x 1 root root     3269 Dec 22 19:34 boot.cmd
-rwxr-xr-x 1 root root     3341 Dec 22 19:51 boot.scr
-rwxr-xr-x 1 root root   215221 Dec 22 18:24 config-5.10.110-rockchip-rk3588
drwxr-xr-x 3 root root     4096 Dec 22 19:36 dtb
drwxr-xr-x 3 root root     4096 Dec 22 19:36 dtb-5.10.110-rockchip-rk3588
-rwxr-xr-x 1 root root 33915392 Dec 22 18:24 Image
-rwxr-xr-x 1 root root 11119990 Dec 22 19:54 initrd.img-5.10.110-rockchip-rk3588
-rwxr-xr-x 1 root root      154 Dec 22 19:51 orangepiEnv.txt
-rwxr-xr-x 1 root root     1542 Dec 22 19:48 orangepi_first_run.txt.template
-rwxr-xr-x 1 root root  7853912 Dec 22 18:24 System.map-5.10.110-rockchip-rk3588
-rwxr-xr-x 1 root root 11120054 Dec 22 19:54 uInitrd
-rwxr-xr-x 1 root root 33915392 Dec 22 18:24 vmlinuz-5.10.110-rockchip-rk3588
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo cp /mnt/orangepiEnv.txt /mnt/orangepiEnv.txt.org
orangepi@orangepi5:~$ sudo vi /mnt/orangepiEnv.txt
orangepi@orangepi5:~$ cat /mnt/orangepiEnv.txt
verbosity=1
bootlogo=true
overlay_prefix=rk3588
fdtfile=rockchip/rk3588s-orangepi-5.dtb
rootdev=UUID=5ead0754-b05b-4f29-8170-b0620e7ae6d2
rootfstype=ext4
overlays=ssd-sata
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo umount /mnt
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo fdisk -l /dev/sda
Disk /dev/sda: 476.94 GiB, 512110190592 bytes, 1000215216 sectors
Disk model: WT M.2 512G
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 58FCCC02-859A-5041-ADA7-14802AADF341

Device      Start       End   Sectors   Size Type
/dev/sda1   61440    585727    524288   256M Linux extended boot
/dev/sda2  585728 990183423 989597696 471.9G Linux filesystem
orangepi@orangepi5:~$

orangepi@orangepi5:~$ ls
Desktop    Downloads  Orangepi5_1.1.0_ubuntu_jammy_desktop_xfce_linux5.10.110.img  Pictures  Templates
Documents  Music      orangepi5-openfyde-r102.img                                  Public    Videos
orangepi@orangepi5:~$ sudo dd if=orangepi5-openfyde-r102.img of=/dev/sda bs=4M conv=fdatasync status=progress
6933184512 bytes (6.9 GB, 6.5 GiB) copied, 16 s, 433 MB/s
1766+1 records in
1766+1 records out
7407221248 bytes (7.4 GB, 6.9 GiB) copied, 19.8569 s, 373 MB/s
orangepi@orangepi5:~$ sudo fdisk -l /dev/sda
GPT PMBR size mismatch (14467228 != 1000215215) will be corrected by write.
The backup GPT table is not on the end of the device.
Disk /dev/sda: 476.94 GiB, 512110190592 bytes, 1000215216 sectors
Disk model: Kingchuxing 512G
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 0A2133E6-2262-584F-8E41-66BED45870B0

Device       Start      End Sectors  Size Type
/dev/sda1  6078464 14467180 8388717    4G Linux filesystem
/dev/sda2    69632   135167   65536   32M ChromeOS kernel
/dev/sda3   499712  6078463 5578752  2.7G ChromeOS root fs
/dev/sda4   135168   200703   65536   32M ChromeOS kernel
/dev/sda5   495616   499711    4096    2M ChromeOS root fs
/dev/sda6    65600    65600       1  512B ChromeOS kernel
/dev/sda7    65601    65601       1  512B ChromeOS root fs
/dev/sda8   200704   233471   32768   16M Linux filesystem
/dev/sda9    65602    65602       1  512B ChromeOS reserved
/dev/sda10   65603    65603       1  512B ChromeOS reserved
/dev/sda11      64    65599   65536   32M unknown
/dev/sda12  364544   495615  131072   64M EFI System

Partition table entries are not in disk order.
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo fdisk -l /dev/sda
Disk /dev/sda: 476.94 GiB, 512110190592 bytes, 1000215216 sectors
Disk model: Kingchuxing 512G
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 1B040000-0000-4531-8000-2CDC00004E46

Device       Start        End   Sectors  Size Type
/dev/sda1     8192      16383      8192    4M unknown
/dev/sda2    16384      28671     12288    6M unknown
/dev/sda3    28672      36863      8192    4M unknown
/dev/sda4    36864      45055      8192    4M unknown
/dev/sda5    45056      53247      8192    4M unknown
/dev/sda6    53248      55295      2048    1M unknown
/dev/sda7    55296     137215     81920   40M unknown
/dev/sda8   137216     333823    196608   96M unknown
/dev/sda9   333824    1120255    786432  384M unknown
/dev/sda10 1120256    1906687    786432  384M unknown
/dev/sda11 1906688    1939455     32768   16M unknown
/dev/sda12 1939456    1941503      2048    1M unknown
/dev/sda13 1941504    8314879   6373376    3G unknown
/dev/sda14 8314880 1000215151 991900272  473G unknown
orangepi@orangepi5:~$

orangepi@orangepi5:~$ sudo mount /dev/sda1 /mnt
orangepi@orangepi5:~$ ls /mnt
dev_image  lost+found  unencrypted  var_overlay  vmlinuz_hd.vblock
orangepi@orangepi5:~$ ls /mnt/unencrypted/
import_extensions
orangepi@orangepi5:~$ ls /mnt/stateful_partition/unencrypted
ls: cannot access '/mnt/stateful_partition/unencrypted': No such file or directory
orangepi@orangepi5:~$

orangepi@orangepi5:~$ echo overlays=ssd-sata | sudo tee /mnt/stateful_partition/unencrypted/Env.txt
tee: /mnt/stateful_partition/unencrypted/Env.txt: No such file or directory
overlays=ssd-sata
orangepi@orangepi5:~$ cat /mnt/stateful_partition/unencrypted/Env.txt
cat: /mnt/stateful_partition/unencrypted/Env.txt: No such file or directory
orangepi@orangepi5:~$

orangepi@orangepi5:~$ echo overlays=ssd-sata | sudo tee /mnt/unencrypted/Env.txt
overlays=ssd-sata
orangepi@orangepi5:~$ cat /mnt/unencrypted/Env.txt
overlays=ssd-sata
orangepi@orangepi5:~$

netapp9101::> network interface service-policy ?
  show                        Display existing service policies

netapp9101::>

netapp9101::> network interface service-policy show
Vserver   Policy                     Service: Allowed Addresses
--------- -------------------------- ----------------------------------------
Cluster
          default-cluster            cluster-core: 0.0.0.0/0

netapp9101
          default-intercluster       intercluster-core: 0.0.0.0/0
                                     management-https: 0.0.0.0/0
                                     backup-ndmp-control: 0.0.0.0/0

          default-management         management-core: 0.0.0.0/0
                                     management-autosupport: 0.0.0.0/0
                                     management-ssh: 0.0.0.0/0
                                     management-https: 0.0.0.0/0
                                     management-ems: 0.0.0.0/0
                                     management-ntp-client: 0.0.0.0/0
                                     management-http: 0.0.0.0/0
                                     backup-ndmp-control: 0.0.0.0/0
                                     management-snmp-server: 0.0.0.0/0
                                     management-ntp-server: 0.0.0.0/0

          default-route-announce     management-bgp: 0.0.0.0/0

svm0
          default-data-blocks        data-core: 0.0.0.0/0
                                     data-iscsi: 0.0.0.0/0

          default-data-files         data-core: 0.0.0.0/0
                                     data-nfs: 0.0.0.0/0
                                     data-cifs: 0.0.0.0/0
                                     data-flexcache: 0.0.0.0/0
                                     data-fpolicy-client: 0.0.0.0/0
                                     data-dns-server: 0.0.0.0/0

          default-data-iscsi         data-core: 0.0.0.0/0
                                     data-iscsi: 0.0.0.0/0

          default-data-nvme-tcp      data-core: 0.0.0.0/0
                                     data-nvme-tcp: 0.0.0.0/0

          default-management         data-core: 0.0.0.0/0
                                     management-ssh: 0.0.0.0/0
                                     management-https: 0.0.0.0/0
                                     data-dns-server: 0.0.0.0/0
                                     management-http: 0.0.0.0/0
                                     backup-ndmp-control: 0.0.0.0/0
                                     management-snmp-server: 0.0.0.0/0
netapp9101::>

netapp9101::> set advanced

Warning: These advanced commands are potentially dangerous; use them only when
         directed to do so by NetApp personnel.
Do you want to continue? {y|n}: y

netapp9101::*> network interface service-policy add-service -vserver svm0 -policy default-data-files -service management-ssh

netapp9101::*> 

netapp9101::*> network interface service-policy show -vserver svm0 -policy default-data-files

                   Vserver: svm0
               Policy Name: default-data-files
         Included Services: data-core, data-nfs, management-ssh,
                            data-fpolicy-client, data-dns-server
Service: Allowed Addresses: data-core: 0.0.0.0/0
                            data-nfs: 0.0.0.0/0
                            management-ssh: 0.0.0.0/0
                            data-fpolicy-client: 0.0.0.0/0
                            data-dns-server: 0.0.0.0/0

netapp9101::*>

netappcluster::> vserver vscan connection-status show-all
                                              Connection
Vserver     Node              Server          Status         Disconnect Reason
----------- ----------------- --------------- -------------- -----------------
svm0        netapp01         192.168.10.110   disconnected   remote-closed
svm0        netapp01         192.168.10.111   connected      na
svm0        netapp01         192.168.10.112   connected      na
svm0        netapp01         192.168.10.113   connected      na
svm0        netapp02         192.168.10.110   disconnected   -
svm0        netapp02         192.168.10.111   disconnected   -
svm0        netapp02         192.168.10.112   disconnected   -
svm0        netapp02         192.168.10.113   disconnected   -
8 entries were displayed.

netappcluster::>

netappcluster::> set adv

Warning: These advanced commands are potentially dangerous; use them only when
         directed to do so by NetApp personnel.
Do you want to continue? {y|n}: y

netappcluster::*>

netappcluster::*> vserver vscan show-events

Vserver     Node            Server          Event Type        Event Time
----------- --------------- --------------- ----------------- -----------------
svm0        netapp01        192.168.10.110  scanner-          1/31/2023
                                            disconnected      18:05:37
svm0        netapp01        192.168.10.110  scanner-connected 1/31/2023
                                                              18:01:45
<略＞

ossv0059::*> vserver vscan show-events -ins

                           Node: netapp01
                 Event Log Time: 1/31/2023 18:05:37
                         Server: 192.168.10.110
                     Event Type: scanner-disconnected
                      File Path: -
                Vscanner Vendor: -
               Vscanner Version: -
       Server Disconnect Reason: remote-closed
Vserver LIF Used for Connection: 192.168.10.10

                           Node: netapp01
                 Event Log Time: 1/31/2023 18:01:45
                         Server: 192.168.10.110
                     Event Type: scanner-connected
                      File Path: -
                Vscanner Vendor: vendor not registered
               Vscanner Version: 0.0
       Server Disconnect Reason: -
Vserver LIF Used for Connection: 192.168.10.10
<略＞

netappcluster::> vserver vscan connection-status show-all -fields version,vendor,server-status,connected-since
node     vserver  server         server-status vendor                     version     connected-since
-------- -------- -------------- ------------- -------------------------- ----------- ------------------
svm0     netapp01 192.168.10.110 disconnected  vendor not registered      0.0         -
svm0     netapp01 192.168.10.111 connected     symantec protection engine 20230130.19 1/31/2023 17:34:33
svm0     netapp01 192.168.10.112 connected     symantec protection engine 20230130.19 1/31/2023 17:35:20
svm0     netapp01 192.168.10.113 connected     symantec protection engine 20230130.19 1/31/2023 17:35:25
svm0     netapp02 192.168.10.110 disconnected  -                          -           -
svm0     netapp02 192.168.10.111 disconnected  -                          -           -
svm0     netapp02 192.168.10.112 disconnected  -                          -           -
svm0     netapp02 192.168.10.113 disconnected  -                          -           -
8 entries were displayed.

netappcluster::>

options+=("orangepi5"                 "Rockchip  RK3588S octa core 4-16GB RAM GBE USB3 USB-C NvME")
#options+=("orangepi5b"                 "Rockchip  RK3588S octa core 4-16GB RAM GBE USB3 USB-C WiFi/BT")

C:\Users\Administrator>net use \\winserver\testvol
\\winserver\testvol のパスワードが無効です。

'winserver' のユーザー名を入力してください: ADOSAKANA\testuser1
winserver のパスワードを入力してください:
システム エラー 59 が発生しました。

予期しないネットワーク エラーが発生しました。


C:\Users\Administrator>

netapp9101::> vserver cifs show -ins
                                          Vserver: svm0
                         CIFS Server NetBIOS Name: SVM0
                    NetBIOS Domain/Workgroup Name: ADOSAKANA
                      Fully Qualified Domain Name: ADOSAKANA.LOCAL
                              Organizational Unit: CN=Computers
Default Site Used by LIFs Without Site Membership:
                                   Workgroup Name: -
                             Authentication Style: domain
                CIFS Server Administrative Status: up
                          CIFS Server Description:
                          List of NetBIOS Aliases: -
 netapp9101::>

netapp9101::> vserver cifs add-netbios-aliases -netbios-aliases WINSERVER -vserver svm0
netapp9101::> vserver cifs show -ins
                                          Vserver: svm0
                         CIFS Server NetBIOS Name: SVM0
                    NetBIOS Domain/Workgroup Name: ADOSAKANA
                      Fully Qualified Domain Name: ADOSAKANA.LOCAL
                              Organizational Unit: CN=Computers
Default Site Used by LIFs Without Site Membership:
                                   Workgroup Name: -
                             Authentication Style: domain
                CIFS Server Administrative Status: up
                          CIFS Server Description:
                          List of NetBIOS Aliases: WINSERVER
 netapp9101::>

C:\Users\Administrator>net use \\winserver\testvol
\\winserver\testvol のパスワードが無効です。

'winserver' のユーザー名を入力してください: ADOSAKANA\testuser1
winserver のパスワードを入力してください:
システム エラー 59 が発生しました。

予期しないネットワーク エラーが発生しました。


C:\Users\Administrator>

C:\Users\Administrator>setspn -l winserver
次の項目に登録されている CN=WINSERVER,CN=Computers,DC=ADOSAKANA,DC=LOCAL:
        HOST/winserver.adosakana.local
        RestrictedKrbHost/winserver.adosakana.local
        HOST/WINSERVER
        RestrictedKrbHost/WINSERVER
        WSMAN/winserver.adosakana.local
        WSMAN/WINSERVER
        TERMSRV/winserver.adosakana.local
        TERMSRV/WINSERVER

C:\Users\Administrator>

C:\Users\Administrator>setspn -l svm0
次の項目に登録されている CN=SVM0,CN=Computers,DC=ADOSAKANA,DC=LOCAL:
        HOST/SVM0
        HOST/svm0.adosakana.local

C:\Users\Administrator>

C:\Users\Administrator>setspn -a HOST/WINSERVER svm0
ドメイン DC=ADOSAKANA,DC=local を確認しています

CN=SVM0,CN=Computers,DC=ADOSAKANA,DC=LOCAL の ServicePrincipalNames を登録しています
        HOST/WINSERVER
更新されたオブジェクト

C:\Users\Administrator>

C:\Users\Administrator>setspn -l svm0
次の項目に登録されている CN=SVM0,CN=Computers,DC=adosakana,DC=local:
        HOST/SVM0
        HOST/svm0.adosakana.local
        HOST/WINSERVER

C:\Users\Administrator>setspn -l winserver
FindDomainForAccount: DsGetDcNameWithAccountW への呼び出しが失敗し、戻り値 0x00000525 が返されました
アカウント winserver は見つかりませんでした

C:\Users\Administrator>

C:\Users\Administrator>net use \\winserver\testvol
\\winserver\testvol のパスワードが無効です。

'winserver' のユーザー名を入力してください: adosakana\testuser1
winserver のパスワードを入力してください:
コマンドは正常に終了しました。


C:\Users\Administrator>

# タブ区切りのため `t を指定
$count=0
$flag=0
$results=@()

$results=cmd /c ssh.exe -l admin NetAppクラスタ "set -privilege admin -rows 0 -showseparator `t -units GB -showallfields true ; vserver cifs share show" | ForEach-Object {
    $line=$_.split("`t")
    if(($line[0] -eq "vserver") -and ($flag -eq 0)){
        $flag=1
        $titlecount=$count
    }
    if(($flag -eq 1) -and ($count -gt ($titlecount+1))){
        $output = New-Object -TypeName psobject
        $output | Add-Member -MemberType NoteProperty -Name "vserver" -Value $line[0]
        $output | Add-Member -MemberType NoteProperty -Name "share-name" -Value $line[1]
        $output | Add-Member -MemberType NoteProperty -Name "cifs-server" -Value $line[2]
        $output | Add-Member -MemberType NoteProperty -Name "path" -Value $line[3]
        $output | Add-Member -MemberType NoteProperty -Name "share-properties" -Value $line[4]
        $output | Add-Member -MemberType NoteProperty -Name "symlink-properties" -Value $line[5]
        $output | Add-Member -MemberType NoteProperty -Name "file-umask" -Value $line[6]
        $output | Add-Member -MemberType NoteProperty -Name "dir-umask" -Value $line[7]
        $output | Add-Member -MemberType NoteProperty -Name "comment" -Value $line[8]
        $output | Add-Member -MemberType NoteProperty -Name "acl" -Value $line[9]
        $output | Add-Member -MemberType NoteProperty -Name "attribute-cache-ttl" -Value $line[10]
        $output | Add-Member -MemberType NoteProperty -Name "volume" -Value $line[11]
        $output | Add-Member -MemberType NoteProperty -Name "offline-file" -Value $line[12]
        $output | Add-Member -MemberType NoteProperty -Name "vscan-fileop-profile" -Value $line[13]
        $output | Add-Member -MemberType NoteProperty -Name "max-connections-per-share" -Value $line[14]
        $output | Add-Member -MemberType NoteProperty -Name "force-group-for-create" -Value $line[15]
        $output
    }
    $count++
}

$results | Export-Csv test.csv -Encoding UTF8 -NoTypeInformation  -NoClobber

ontap91::> vserver cifs create -cifs-server newsvm0 -domain adosakana.local -ou CN=Computers

In order to create an Active Directory machine account for the CIFS server, you
must supply the name and password of a Windows account with sufficient
privileges to add computers to the "CN=Computers" container within the
"ADOSAKANA.LOCAL" domain.

Enter the user name: administrator

Enter the password:

Error: Machine account creation procedure failed
  [    91] Loaded the preliminary configuration.
  [   213] Created a machine account in the domain
  [   214] Successfully connected to ip 172.17.44.49, port 445 using
           TCP
  [   249] Encountered NT error (NT_STATUS_MORE_PROCESSING_REQUIRED)
           for SMB command SessionSetup
  [   250] Cluster and Domain Controller times differ by more than
           the configured clock skew (KRB5KRB_AP_ERR_SKEW)
  [   250] Kerberos authentication failed with result: 7537.
  [   258] Encountered NT error (NT_STATUS_MORE_PROCESSING_REQUIRED)
           for SMB command SessionSetup
  [   259] Cluster and Domain Controller times differ by more than
           the configured clock skew (KRB5KRB_AP_ERR_SKEW)
  [   259] Kerberos authentication failed with result: 7537.
  [   259] Unable to connect to LSA service on
           adserver.adosakana.local (Error:
           RESULT_ERROR_KERBEROS_SKEW)
  [   260] No servers available for MS_LSA, vserver: 2, domain:
           adosakana.local.
**[   260] FAILURE: Unable to make a connection (LSA:ADOSAKANA.LOCAL),
**         result: 6940
  [   260] Could not find Windows SID
           'S-1-5-21-937304154-1581684492-536532533-512'
  [   284] Deleted existing account
           'CN=NEWSVM0,CN=Computers,DC=adosakana,DC=local'

Error: command failed: Failed to create the Active Directory machine account
       "NEWSVM0". Reason: SecD Error: no server available.

ontap91::>